DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino
DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino
SKU:070016
Regular price
$4.99
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Features:
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- 45 V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- 4-layer, 2 oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
- Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)
Package Included:
1 x DRV8825 Module
1 x Heatsink
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $5.99{"id":1757081075770,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2018-07-24T16:54:01+08:00","created_at":"2018-07-24T16:55:48+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":239,"compare_at_price_min":239,"compare_at_price_max":239,"compare_at_price_varies":false,"variants":[{"id":16706714140730,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"070016","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":239,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","options":["Title"],"media":[{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451552327,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451650631,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451716167,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451847239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451912775,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678452011079,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
-
Translation missing: en.products.product.regular_price $4.99{"id":1757081075770,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2018-07-24T16:54:01+08:00","created_at":"2018-07-24T16:55:48+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":239,"compare_at_price_min":239,"compare_at_price_max":239,"compare_at_price_varies":false,"variants":[{"id":16706714140730,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"070016","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":239,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","options":["Title"],"media":[{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451552327,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451650631,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451716167,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451847239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451912775,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678452011079,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
-
Translation missing: en.products.product.regular_price $6.99{"id":1757081075770,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2018-07-24T16:54:01+08:00","created_at":"2018-07-24T16:55:48+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":239,"compare_at_price_min":239,"compare_at_price_max":239,"compare_at_price_varies":false,"variants":[{"id":16706714140730,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"070016","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":239,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","options":["Title"],"media":[{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451552327,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451650631,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451716167,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451847239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451912775,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678452011079,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
-
Translation missing: en.products.product.regular_price $5.99{"id":1757081075770,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2018-07-24T16:54:01+08:00","created_at":"2018-07-24T16:55:48+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":239,"compare_at_price_min":239,"compare_at_price_max":239,"compare_at_price_varies":false,"variants":[{"id":16706714140730,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"070016","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":239,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","options":["Title"],"media":[{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451552327,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451650631,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451716167,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451847239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451912775,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678452011079,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}
-
Translation missing: en.products.product.regular_price $9.99{"id":1757081075770,"title":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","handle":"arduino-drv8825-stepper-motor-driver-module-3d-printer-ramps1-4-reprap-stepstick","description":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink","published_at":"2018-07-24T16:54:01+08:00","created_at":"2018-07-24T16:55:48+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":239,"compare_at_price_min":239,"compare_at_price_max":239,"compare_at_price_varies":false,"variants":[{"id":16706714140730,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"070016","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DRV8825 Stepper Motor Driver Module 3D Printer RAMPS1.4 RepRap StepStick with Heatsink for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":239,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610","\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","options":["Title"],"media":[{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451552327,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_585.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451650631,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_707.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451716167,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_437.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451847239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_347.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678451912775,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_837.jpg?v=1588646610","width":1000},{"alt":"Drv8825 Stepper Motor Driver Module 3D Printer Ramps1.4 Reprap Stepstick With Heatsink For Arduino","id":6678452011079,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_807.jpg?v=1588646610","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSimple step and direction control interface\u003c\/li\u003e\n\u003cli\u003eSix different step resolutions: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step\u003c\/li\u003e\n\u003cli\u003eAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates\u003c\/li\u003e\n\u003cli\u003e45 V maximum supply voltage\u003c\/li\u003e\n\u003cli\u003eBuilt-in regulator (no external logic voltage supply needed)\u003c\/li\u003e\n\u003cli\u003eOver-temperature thermal shutdown, over-current shutdown, and under-voltage lockout\u003c\/li\u003e\n\u003cli\u003eShort-to-ground and shorted-load protection\u003c\/li\u003e\n\u003cli\u003e4-layer, 2 oz copper PCB for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eExposed solderable ground pad below the driver IC on the bottom of the PCB\u003c\/li\u003e\n\u003cli\u003eModule size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DRV8825 Module\u003cbr\u003e1 x Heatsink"}