2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic
2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic
SKU:X13092
Regular price
$4.99
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Applicable scope:
Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)
Product Size:
45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)
Charging voltage: 8.4V - 9.0V
Continuous discharge current (upper limit): 20A (If the cooling environment is not good, reduce the load current use)
Continuous charge current (upper limit): 10A
Standard Edition: Suitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.
Balanced version: Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.
Note 1: The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)
Note 2: Connect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.
Note 3: When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.
For some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).
Package Include:
1* BMS board
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $5.99{"id":4338668699719,"title":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic","handle":"2s-10a-20a-7-4v-8-4v-18650-polymer-lithium-battery-protection-bms-board-standard-balance-module-diy-electronic","description":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-11-05T15:13:32+08:00","created_at":"2019-11-05T15:17:53+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31137907015751,"title":"Standard Board","option1":"Standard Board","option2":null,"option3":null,"sku":"X13092","requires_shipping":true,"taxable":true,"featured_image":{"id":14506604953671,"product_id":4338668699719,"position":9,"created_at":"2020-05-05T16:31:00+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","variant_ids":[31137907015751]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Standard Board","public_title":"Standard Board","options":["Standard Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31137907048519,"title":"Balance Board","option1":"Balance Board","option2":null,"option3":null,"sku":"X13090","requires_shipping":true,"taxable":true,"featured_image":{"id":14506605150279,"product_id":4338668699719,"position":10,"created_at":"2020-05-05T16:31:04+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","variant_ids":[31137907048519]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Balance Board","public_title":"Balance Board","options":["Balance Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","options":["Size"],"media":[{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788191815,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788617799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788748871,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789076551,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789109319,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789240391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789600839,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789764679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e"}
-
Translation missing: en.products.product.regular_price $7.99{"id":4338668699719,"title":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic","handle":"2s-10a-20a-7-4v-8-4v-18650-polymer-lithium-battery-protection-bms-board-standard-balance-module-diy-electronic","description":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-11-05T15:13:32+08:00","created_at":"2019-11-05T15:17:53+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31137907015751,"title":"Standard Board","option1":"Standard Board","option2":null,"option3":null,"sku":"X13092","requires_shipping":true,"taxable":true,"featured_image":{"id":14506604953671,"product_id":4338668699719,"position":9,"created_at":"2020-05-05T16:31:00+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","variant_ids":[31137907015751]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Standard Board","public_title":"Standard Board","options":["Standard Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31137907048519,"title":"Balance Board","option1":"Balance Board","option2":null,"option3":null,"sku":"X13090","requires_shipping":true,"taxable":true,"featured_image":{"id":14506605150279,"product_id":4338668699719,"position":10,"created_at":"2020-05-05T16:31:04+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","variant_ids":[31137907048519]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Balance Board","public_title":"Balance Board","options":["Balance Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","options":["Size"],"media":[{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788191815,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788617799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788748871,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789076551,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789109319,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789240391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789600839,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789764679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e"}
-
Translation missing: en.products.product.regular_price $10.99{"id":4338668699719,"title":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic","handle":"2s-10a-20a-7-4v-8-4v-18650-polymer-lithium-battery-protection-bms-board-standard-balance-module-diy-electronic","description":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-11-05T15:13:32+08:00","created_at":"2019-11-05T15:17:53+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31137907015751,"title":"Standard Board","option1":"Standard Board","option2":null,"option3":null,"sku":"X13092","requires_shipping":true,"taxable":true,"featured_image":{"id":14506604953671,"product_id":4338668699719,"position":9,"created_at":"2020-05-05T16:31:00+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","variant_ids":[31137907015751]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Standard Board","public_title":"Standard Board","options":["Standard Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31137907048519,"title":"Balance Board","option1":"Balance Board","option2":null,"option3":null,"sku":"X13090","requires_shipping":true,"taxable":true,"featured_image":{"id":14506605150279,"product_id":4338668699719,"position":10,"created_at":"2020-05-05T16:31:04+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","variant_ids":[31137907048519]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Balance Board","public_title":"Balance Board","options":["Balance Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","options":["Size"],"media":[{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788191815,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788617799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788748871,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789076551,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789109319,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789240391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789600839,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789764679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e"}
-
Translation missing: en.products.product.regular_price $7.99{"id":4338668699719,"title":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic","handle":"2s-10a-20a-7-4v-8-4v-18650-polymer-lithium-battery-protection-bms-board-standard-balance-module-diy-electronic","description":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-11-05T15:13:32+08:00","created_at":"2019-11-05T15:17:53+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31137907015751,"title":"Standard Board","option1":"Standard Board","option2":null,"option3":null,"sku":"X13092","requires_shipping":true,"taxable":true,"featured_image":{"id":14506604953671,"product_id":4338668699719,"position":9,"created_at":"2020-05-05T16:31:00+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","variant_ids":[31137907015751]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Standard Board","public_title":"Standard Board","options":["Standard Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31137907048519,"title":"Balance Board","option1":"Balance Board","option2":null,"option3":null,"sku":"X13090","requires_shipping":true,"taxable":true,"featured_image":{"id":14506605150279,"product_id":4338668699719,"position":10,"created_at":"2020-05-05T16:31:04+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","variant_ids":[31137907048519]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Balance Board","public_title":"Balance Board","options":["Balance Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","options":["Size"],"media":[{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788191815,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788617799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788748871,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789076551,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789109319,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789240391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789600839,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789764679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e"}
-
Translation missing: en.products.product.regular_price $5.99{"id":4338668699719,"title":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic","handle":"2s-10a-20a-7-4v-8-4v-18650-polymer-lithium-battery-protection-bms-board-standard-balance-module-diy-electronic","description":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-11-05T15:13:32+08:00","created_at":"2019-11-05T15:17:53+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31137907015751,"title":"Standard Board","option1":"Standard Board","option2":null,"option3":null,"sku":"X13092","requires_shipping":true,"taxable":true,"featured_image":{"id":14506604953671,"product_id":4338668699719,"position":9,"created_at":"2020-05-05T16:31:00+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","variant_ids":[31137907015751]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Standard Board","public_title":"Standard Board","options":["Standard Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31137907048519,"title":"Balance Board","option1":"Balance Board","option2":null,"option3":null,"sku":"X13090","requires_shipping":true,"taxable":true,"featured_image":{"id":14506605150279,"product_id":4338668699719,"position":10,"created_at":"2020-05-05T16:31:04+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","variant_ids":[31137907048519]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Balance Board","public_title":"Balance Board","options":["Balance Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","options":["Size"],"media":[{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788191815,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788617799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788748871,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789076551,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789109319,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789240391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789600839,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789764679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e"}
-
Translation missing: en.products.product.regular_price $8.99{"id":4338668699719,"title":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic","handle":"2s-10a-20a-7-4v-8-4v-18650-polymer-lithium-battery-protection-bms-board-standard-balance-module-diy-electronic","description":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-11-05T15:13:32+08:00","created_at":"2019-11-05T15:17:53+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31137907015751,"title":"Standard Board","option1":"Standard Board","option2":null,"option3":null,"sku":"X13092","requires_shipping":true,"taxable":true,"featured_image":{"id":14506604953671,"product_id":4338668699719,"position":9,"created_at":"2020-05-05T16:31:00+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","variant_ids":[31137907015751]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Standard Board","public_title":"Standard Board","options":["Standard Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31137907048519,"title":"Balance Board","option1":"Balance Board","option2":null,"option3":null,"sku":"X13090","requires_shipping":true,"taxable":true,"featured_image":{"id":14506605150279,"product_id":4338668699719,"position":10,"created_at":"2020-05-05T16:31:04+08:00","updated_at":"2020-05-05T16:31:05+08:00","alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","variant_ids":[31137907048519]},"available":true,"name":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection BMS Board Standard Balance Module Diy Electronic - Balance Board","public_title":"Balance Board","options":["Balance Board"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","options":["Size"],"media":[{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788191815,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_8_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788617799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_5_623.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679788748871,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_9_811.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789076551,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_1_442.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789109319,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_2_989.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789240391,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_3_457.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789600839,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_6_351.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789764679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_X13090_7_945.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679789928519,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13092_1_216.jpg?v=1588667465","width":1000},{"alt":"2S 10A 20A 7.4V 8.4V 18650 Polymer Lithium Battery Protection Bms Board Standard Balance Module Diy","id":6679790125127,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13090_6_429.jpg?v=1588667465","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eApplicable scope:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSuitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eProduct Size:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e45*15*3.4mm (Standard), 48*20*3.4mm (Balancing)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCharging voltage:\u003c\/strong\u003e 8.4V - 9.0V\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous discharge current (upper limit):\u003c\/strong\u003e 20A (If the cooling environment is not good, reduce the load current use)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eContinuous charge current (upper limit):\u003c\/strong\u003e 10A\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eStandard Edition: \u003c\/strong\u003eSuitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eBalanced version:\u003c\/strong\u003e Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003cspan\u003eNote 1:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e The successful start of power drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start drill! ! !); 0V and 8.4V cable, use 2 square mm Above copper wire (cannot use nickel plate!!!)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 2: \u003c\/strong\u003eConnect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNote 3:\u003c\/strong\u003e When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFor some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity\/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan\u003ePackage Include:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1* BMS board\u003c\/span\u003e\u003c\/div\u003e"}