TLV3501 Single Channel High Speed Comparator Frequency Meter Front Shaping Module DC 2.7-5V Frequency Counter SMA Female Head

TLV3501 Single Channel High Speed Comparator Frequency Meter Front Shaping Module DC 2.7-5V Frequency Counter SMA Female Head

SKU:X13776
Regular price $10.99

Descriptions:

 

TLV3501 is a single-channel high-speed push-pull output comparator, delay is 4.5ns, supply voltage: + 2.7V to + 5.5V, has exceeded swing input common-mode range makes it ideally suited for low voltage applications. Rail-to-rail output can directly drive a CMOS or TTL logic. This module can be for a wide range of voltage signal shaping period, as the frequency, phase difference time domain measurements and other front-end conditioning module, can be used as the 2015 National Undergraduate Electronic Design Contest F digital frequency meter title front-end module.

 

Features:

 

TLV3501 is a single-channel high-speed push-pull output comparator, delay is 4.5ns, supply voltage: + 2.7V to + 5.5V.

This module can be for a wide range of voltage signal shaping period, as the frequency, phase difference time domain measurements and other front-end conditioning module.

Rail-to-rail output can directly drive a CMOS or TTL logic.

Without threshold setting, the sine wave, square wave and triangular wave can be transformed into square wave, which can be used easily without debugging.

At the same time, it has great extensibility, just change a small amount of the original.

 

Specifications:

 

Power supply voltage: 2.7-5VDC

Input voltage: 8-1000mV (effective value)

Output level: rail to rail output, can directly drive TTL/CMOS level

Input frequency: 1Hz-- 120MHz, Min.1Hz

Interface form: SMA female head (external screw hole)

Input impedance: 20K ohm

Size: 5 x2.5cm/1.96 x 0.98inch

Weight: 8g

 

Product Use:

 

1. Sine wave to square wave

2. The zero-crossing comparator

3. Universal comparator

 

Package Included:

 

1 x Frequency Meter Front Shaping Module

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

Descriptions:

 

TLV3501 is a single-channel high-speed push-pull output comparator, delay is 4.5ns, supply voltage: + 2.7V to + 5.5V, has exceeded swing input common-mode range makes it ideally suited for low voltage applications. Rail-to-rail output can directly drive a CMOS or TTL logic. This module can be for a wide range of voltage signal shaping period, as the frequency, phase difference time domain measurements and other front-end conditioning module, can be used as the 2015 National Undergraduate Electronic Design Contest F digital frequency meter title front-end module.

 

Features:

 

TLV3501 is a single-channel high-speed push-pull output comparator, delay is 4.5ns, supply voltage: + 2.7V to + 5.5V.

This module can be for a wide range of voltage signal shaping period, as the frequency, phase difference time domain measurements and other front-end conditioning module.

Rail-to-rail output can directly drive a CMOS or TTL logic.

Without threshold setting, the sine wave, square wave and triangular wave can be transformed into square wave, which can be used easily without debugging.

At the same time, it has great extensibility, just change a small amount of the original.

 

Specifications:

 

Power supply voltage: 2.7-5VDC

Input voltage: 8-1000mV (effective value)

Output level: rail to rail output, can directly drive TTL/CMOS level

Input frequency: 1Hz-- 120MHz, Min.1Hz

Interface form: SMA female head (external screw hole)

Input impedance: 20K ohm

Size: 5 x2.5cm/1.96 x 0.98inch

Weight: 8g

 

Product Use:

 

1. Sine wave to square wave

2. The zero-crossing comparator

3. Universal comparator

 

Package Included:

 

1 x Frequency Meter Front Shaping Module

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.