12V LED Automation Delay Timer Control Switch Relay Module with case

12V Led Automation Delay Timer Control Switch Relay Module With Case

12V LED Automation Delay Timer Control Switch Relay Module with case

SKU:010820
$7.99

Description：
  • New upgrades to simplify,to meet customer needs.
  • Increase the supply anti-reversefunction.
  • The use of opto isolated input and output,enhanced anti-jamming capabilit
  • consumption.
  • Set parameter after power for ever memories.
  • Signal terminal voltage signal can be maintained for a longtime.
  • to ensure stability,industrial grade board,class PLC.
Product parameters:
  • Size:64.2mm*34.8mm*18.5mm.
  • Relay Specifications:AC 220V 10A or DC 30V 10A.
  • Quiescent Current:20mA,Operating Current:50mA.
  • Working voltage:10~16V (if other ranges can be customized).
  • Signal voltage:4V~20V (if other ranges can be customized).
  • life:about100,000times,Working temperature:-40~85'C.
  • Working mode selection:After power on,long press K12 seconds later into the select function mode,P1-1~P1-4forchoose.
  • P1-1 operating modes:a signal to trigger relay, time is up,the relay
  • disconnect users,You can set relay time T,click K2 the hundreddigital
  • tube starts flashing,then press K3, the hundred digital change;click K2
  • ten digital tube starts flashing,then press K3,ten digit changes;click K2
  • bit digital tube starts flashing, then press K3, single-digit change;then
  • click K2,; digital pipe does not blink,then press the K3, shifting the
  • decimalpoint,the decimalpointin abitindicates 0-999minutesin ten
  • represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999
  • seconds;goodchoice,bringing the time setting is completed.Short press
  • K1,enterfunction offine-tuning settings,triggerthedefaultdelayperiod
  • is invalid, press K1, during the delay trigger active(re-timing),clickon
  • the K1, during the delay reset (timer turned off,the relay reset) press
  • again to repeat the default settings for the first time.
  • P1-2 operating modes:Asignal trigger ,digital countdown begins,X
  • seconds after,there lay open Y seconds,then close.Users can set the relay
  • time X,Y;P1-1different time settings similar to the blue lights that set
  • the relay time,blue light indicates setting relay off time. Short press K1,
  • enter function offine-tuning the set,the default trigger is invalid during
  • the delay,pressK1,during the delay trigger active(re-timing),then click
  • the first repeat default settings.
  • P1-3 operating modes:Open X seconds,disconnect Yseconds, infinite
  • loop.Users can set the relay timeX,Y;time setting similar to P1-2.Short
  • press K1,enter function offine-tuning set,The default function is:set up
  • an electric circuit the relay first open, press the K1,there lay first
  • close.Press again to repeat the default functionality.
  • P1-4 operating modes:a signal to trigger the relay open but do not start
  • the timer,when the trigger signal disappears,digital count down begins,X
  • time after,the relayclose; During the delay,again to the signal,digital
  • count down canceled, stays energized, the signal disappears, restart
  • count down; (equivalentto release the button to start timing, commonly
  • usedin power-offdelay).Users canset the relay time X; time setting similar to P1-

Package Included:
  • 1PCS * 12V LED Automation Delay Timer Control Switch Relay Module with Case M
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
Description：
  • New upgrades to simplify,to meet customer needs.
  • Increase the supply anti-reversefunction.
  • The use of opto isolated input and output,enhanced anti-jamming capabilit
  • consumption.
  • Set parameter after power for ever memories.
  • Signal terminal voltage signal can be maintained for a longtime.
  • to ensure stability,industrial grade board,class PLC.
Product parameters:
  • Size:64.2mm*34.8mm*18.5mm.
  • Relay Specifications:AC 220V 10A or DC 30V 10A.
  • Quiescent Current:20mA,Operating Current:50mA.
  • Working voltage:10~16V (if other ranges can be customized).
  • Signal voltage:4V~20V (if other ranges can be customized).
  • life:about100,000times,Working temperature:-40~85'C.
  • Working mode selection:After power on,long press K12 seconds later into the select function mode,P1-1~P1-4forchoose.
  • P1-1 operating modes:a signal to trigger relay, time is up,the relay
  • disconnect users,You can set relay time T,click K2 the hundreddigital
  • tube starts flashing,then press K3, the hundred digital change;click K2
  • ten digital tube starts flashing,then press K3,ten digit changes;click K2
  • bit digital tube starts flashing, then press K3, single-digit change;then
  • click K2,; digital pipe does not blink,then press the K3, shifting the
  • decimalpoint,the decimalpointin abitindicates 0-999minutesin ten
  • represents 0 to 99.9 seconds withou tadecimalpointrepresents 0-999
  • seconds;goodchoice,bringing the time setting is completed.Short press
  • K1,enterfunction offine-tuning settings,triggerthedefaultdelayperiod
  • is invalid, press K1, during the delay trigger active(re-timing),clickon
  • the K1, during the delay reset (timer turned off,the relay reset) press
  • again to repeat the default settings for the first time.
  • P1-2 operating modes:Asignal trigger ,digital countdown begins,X
  • seconds after,there lay open Y seconds,then close.Users can set the relay
  • time X,Y;P1-1different time settings similar to the blue lights that set
  • the relay time,blue light indicates setting relay off time. Short press K1,
  • enter function offine-tuning the set,the default trigger is invalid during
  • the delay,pressK1,during the delay trigger active(re-timing),then click
  • the first repeat default settings.
  • P1-3 operating modes:Open X seconds,disconnect Yseconds, infinite
  • loop.Users can set the relay timeX,Y;time setting similar to P1-2.Short
  • press K1,enter function offine-tuning set,The default function is:set up
  • an electric circuit the relay first open, press the K1,there lay first
  • close.Press again to repeat the default functionality.
  • P1-4 operating modes:a signal to trigger the relay open but do not start
  • the timer,when the trigger signal disappears,digital count down begins,X
  • time after,the relayclose; During the delay,again to the signal,digital
  • count down canceled, stays energized, the signal disappears, restart
  • count down; (equivalentto release the button to start timing, commonly
  • usedin power-offdelay).Users canset the relay time X; time setting similar to P1-

Package Included:
  • 1PCS * 12V LED Automation Delay Timer Control Switch Relay Module with Case M

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Other Customers also buy:

  • 12V Led Automation Delay Timer Control Switch Relay Module With Case 2 Wire 0.56\" Voltmeter LED Tube Digital DC4.5/4.7/5V-30V Voltage Panel Meter
    2 Wire 0.56\" Voltmeter LED Tube Digital DC4.5/4.7/5V-30V Voltage Panel Meter
    $5.99
  • 12V Led Automation Delay Timer Control Switch Relay Module With Case 2.42 Inch 12864 Oled Display Module Iic I2C Spi Serial For Arduino C51 Stm32 Green/white/blue/yellow
    2.42" inch OLED Display RGB SSD1309 12864 SPI Serial Port for Arduino C51
    $23.99
  • 12V Led Automation Delay Timer Control Switch Relay Module With Case 18650 Battery Shield V8 Mobile Power Bank 3V/5V For Arduino Esp32 Esp8266 Wifi Expansion Module
    18650 Battery Shield V8 Mobile Power Bank 3V/5V for Arduino ESP32 ESP8266
    $5.99
  • 12V Led Automation Delay Timer Control Switch Relay Module With Case USB Charger Doctor Capacity Tester LCD Display Current Voltage Detector Meter
    USB Charger Doctor Capacity Tester LCD Display Current Voltage Detector Meter
    $7.99
  • 12V Led Automation Delay Timer Control Switch Relay Module With Case Esp32 Esp32S Wemos 4Pcs 18650 Lithium Battery Charging Shield 5V/3A 3V/1A Power Bank Expansion Board
    ESP32 ESP8266 4x 18650 Battery USB Power Bank Shield Holder V9 3V/5V
    $9.99
  • 12V Led Automation Delay Timer Control Switch Relay Module With Case 10Cm 40Pin Male To Male/ M-F/f-F Wire Jumper Breadboard Multicolored Dupont Ribbon Cables Kit For
    10cm 40pin Male to Male/ M-F/F-F Wire Jumper Breadboard Multicolored Dupont Ribbon Cables Kit for Arduino
    $5.99