I2C ADS1115 ADS1015 Module ADC 4-Channel with Pro Gain Amplifier for Arduino

I2C ADS1115 ADS1015 Module ADC 4-Channel with Pro Gain Amplifier for Arduino

SKU:011136
Regular price $13.94 Sale price $10.99

HTB1ZYSui4PI8KJjSspoq6x6MFXaU

Product Discription:
For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC,
the ADS1115 provides 16-bit precision at 860 samples second over I2C.
The chip can be configured as 4 single-ended input channels, or two differential channels.
As a nice bonus, it even includes a programmable gain amplifier, up to x16,
to help boost up smaller single/differential signals to the full range.
We like this ADC because it can run from 2V to 5V power/logic,
can measure a large range of signals and its super easy to use.
It is a great general purpose 16 bit converter.
The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet.
Interfacing is done via I2C.
The address can be changed to one of four options (see the datasheet table 5)
so you can have up to 4 ADS1115's connected on a single 2-wire I2C bus for 16 single ended inputs.
specification:
Wide supply range: 2.0V to 5.5V
Continuous Mode: Only 150μA
Single-Shot Mode: Auto Shut-Down
Programmable data rate: 8SPS to 860SPS
Internal low-drift voltage reference
Internal oscillator
Internal PGA
I2C interface: Pin-Selectable Addresses
Four single-ended or two differential inputs
Programmable comparator
This board chip uses I2C 7-bit addresses between 0x48-0x4B
PCB size:(L*W)2.55*0.90cm/1.00"*0.35"
Package Included:
1 set * 16 Bit IIC I2C 4 Channel ADS1115 Module ADC with Pro Gain Amplifier For Arduino 2V To 5V Auto Shut Down Programmable Comparator

HTB1jCuMiY_I8KJjy1Xaq6zsxpXaS

1234567

HTB1CoFQi_TI8KJjSsphq6AFppXax

7868

HOT SELLING

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

HTB1ZYSui4PI8KJjSspoq6x6MFXaU

Product Discription:
For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC,
the ADS1115 provides 16-bit precision at 860 samples second over I2C.
The chip can be configured as 4 single-ended input channels, or two differential channels.
As a nice bonus, it even includes a programmable gain amplifier, up to x16,
to help boost up smaller single/differential signals to the full range.
We like this ADC because it can run from 2V to 5V power/logic,
can measure a large range of signals and its super easy to use.
It is a great general purpose 16 bit converter.
The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet.
Interfacing is done via I2C.
The address can be changed to one of four options (see the datasheet table 5)
so you can have up to 4 ADS1115's connected on a single 2-wire I2C bus for 16 single ended inputs.
specification:
Wide supply range: 2.0V to 5.5V
Continuous Mode: Only 150μA
Single-Shot Mode: Auto Shut-Down
Programmable data rate: 8SPS to 860SPS
Internal low-drift voltage reference
Internal oscillator
Internal PGA
I2C interface: Pin-Selectable Addresses
Four single-ended or two differential inputs
Programmable comparator
This board chip uses I2C 7-bit addresses between 0x48-0x4B
PCB size:(L*W)2.55*0.90cm/1.00"*0.35"
Package Included:
1 set * 16 Bit IIC I2C 4 Channel ADS1115 Module ADC with Pro Gain Amplifier For Arduino 2V To 5V Auto Shut Down Programmable Comparator

HTB1jCuMiY_I8KJjy1Xaq6zsxpXaS

1234567

HTB1CoFQi_TI8KJjSsphq6AFppXax

7868

HOT SELLING

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Customer Reviews

Based on 5 reviews Write a review