3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced/Enhanced
3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced/Enhanced
SKU:X40351
Regular price
$5.99
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
3S 60A lithium battery protection board
Scope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)
Charging voltage: 12.6V - 13.6V
Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)
Continuous charge current (upper limit): 15A
Enhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)
Balanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)
Note 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).
Note 2: Do not deliberately make it short circuit.
Note 3: When the battery is charging,the "430" resistance heating is normal,it means the balance circuit is working.If the "430" resistance is also heating without charging,please check if the wrong wire is connected.
3S 30A lithium battery protection board
Feture:
Scope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)
Charging voltage: 12.6V-13.6V
Continuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.
Continuous charging current (upper limit): 20A
Standard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W
Equilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.
Note 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)
Note 2: do not intentionally short circuit
Note 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)
4S 16.8V 40A lithium battery protection board
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Charging voltage: 16.8V - 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
Note:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different
Standard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)
Enhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)
Balanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)
Enhanced version Purchase link:Please click here
Note 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).
Note 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
Note 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
Note 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $5.99{"id":4332921552967,"title":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced","handle":"3s-60a-30a-4s-40a-li-ion-lithium-battery-charger-protection-board-bms-3s-4s-for-drill-motor-16-8v-battery-balancer-power-bank","description":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e","published_at":"2019-11-01T12:23:38+08:00","created_at":"2019-11-01T12:24:22+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31100138160199,"title":"3s 30A Balance Type","option1":"3s 30A Balance Type","option2":null,"option3":null,"sku":"X40351","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580410439,"product_id":4332921552967,"position":4,"created_at":"2020-05-05T16:26:23+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","variant_ids":[31100138160199]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 30A Balance Type","public_title":"3s 30A Balance Type","options":["3s 30A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138192967,"title":"3s 60A standard Type","option1":"3s 60A standard Type","option2":null,"option3":null,"sku":"X40353","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581164103,"product_id":4332921552967,"position":7,"created_at":"2020-05-05T16:26:35+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","variant_ids":[31100138192967]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A standard Type","public_title":"3s 60A standard Type","options":["3s 60A standard Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138225735,"title":"3s 60A Balance Type","option1":"3s 60A Balance Type","option2":null,"option3":null,"sku":"X40354","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581426247,"product_id":4332921552967,"position":8,"created_at":"2020-05-05T16:26:39+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","variant_ids":[31100138225735]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A Balance Type","public_title":"3s 60A Balance Type","options":["3s 60A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138258503,"title":"4s 40A Balance Type","option1":"4s 40A Balance Type","option2":null,"option3":null,"sku":"040298","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580770887,"product_id":4332921552967,"position":5,"created_at":"2020-05-05T16:26:27+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","variant_ids":[31100138258503]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 4s 40A Balance Type","public_title":"4s 40A Balance Type","options":["4s 40A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","options":["Type"],"media":[{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764205639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764631623,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764992071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765778503,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766696007,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766827079,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679767482439,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $23.99{"id":4332921552967,"title":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced","handle":"3s-60a-30a-4s-40a-li-ion-lithium-battery-charger-protection-board-bms-3s-4s-for-drill-motor-16-8v-battery-balancer-power-bank","description":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e","published_at":"2019-11-01T12:23:38+08:00","created_at":"2019-11-01T12:24:22+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31100138160199,"title":"3s 30A Balance Type","option1":"3s 30A Balance Type","option2":null,"option3":null,"sku":"X40351","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580410439,"product_id":4332921552967,"position":4,"created_at":"2020-05-05T16:26:23+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","variant_ids":[31100138160199]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 30A Balance Type","public_title":"3s 30A Balance Type","options":["3s 30A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138192967,"title":"3s 60A standard Type","option1":"3s 60A standard Type","option2":null,"option3":null,"sku":"X40353","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581164103,"product_id":4332921552967,"position":7,"created_at":"2020-05-05T16:26:35+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","variant_ids":[31100138192967]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A standard Type","public_title":"3s 60A standard Type","options":["3s 60A standard Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138225735,"title":"3s 60A Balance Type","option1":"3s 60A Balance Type","option2":null,"option3":null,"sku":"X40354","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581426247,"product_id":4332921552967,"position":8,"created_at":"2020-05-05T16:26:39+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","variant_ids":[31100138225735]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A Balance Type","public_title":"3s 60A Balance Type","options":["3s 60A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138258503,"title":"4s 40A Balance Type","option1":"4s 40A Balance Type","option2":null,"option3":null,"sku":"040298","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580770887,"product_id":4332921552967,"position":5,"created_at":"2020-05-05T16:26:27+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","variant_ids":[31100138258503]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 4s 40A Balance Type","public_title":"4s 40A Balance Type","options":["4s 40A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","options":["Type"],"media":[{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764205639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764631623,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764992071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765778503,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766696007,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766827079,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679767482439,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $5.99{"id":4332921552967,"title":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced","handle":"3s-60a-30a-4s-40a-li-ion-lithium-battery-charger-protection-board-bms-3s-4s-for-drill-motor-16-8v-battery-balancer-power-bank","description":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e","published_at":"2019-11-01T12:23:38+08:00","created_at":"2019-11-01T12:24:22+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31100138160199,"title":"3s 30A Balance Type","option1":"3s 30A Balance Type","option2":null,"option3":null,"sku":"X40351","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580410439,"product_id":4332921552967,"position":4,"created_at":"2020-05-05T16:26:23+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","variant_ids":[31100138160199]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 30A Balance Type","public_title":"3s 30A Balance Type","options":["3s 30A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138192967,"title":"3s 60A standard Type","option1":"3s 60A standard Type","option2":null,"option3":null,"sku":"X40353","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581164103,"product_id":4332921552967,"position":7,"created_at":"2020-05-05T16:26:35+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","variant_ids":[31100138192967]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A standard Type","public_title":"3s 60A standard Type","options":["3s 60A standard Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138225735,"title":"3s 60A Balance Type","option1":"3s 60A Balance Type","option2":null,"option3":null,"sku":"X40354","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581426247,"product_id":4332921552967,"position":8,"created_at":"2020-05-05T16:26:39+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","variant_ids":[31100138225735]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A Balance Type","public_title":"3s 60A Balance Type","options":["3s 60A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138258503,"title":"4s 40A Balance Type","option1":"4s 40A Balance Type","option2":null,"option3":null,"sku":"040298","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580770887,"product_id":4332921552967,"position":5,"created_at":"2020-05-05T16:26:27+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","variant_ids":[31100138258503]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 4s 40A Balance Type","public_title":"4s 40A Balance Type","options":["4s 40A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","options":["Type"],"media":[{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764205639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764631623,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764992071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765778503,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766696007,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766827079,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679767482439,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $7.99{"id":4332921552967,"title":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced","handle":"3s-60a-30a-4s-40a-li-ion-lithium-battery-charger-protection-board-bms-3s-4s-for-drill-motor-16-8v-battery-balancer-power-bank","description":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e","published_at":"2019-11-01T12:23:38+08:00","created_at":"2019-11-01T12:24:22+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31100138160199,"title":"3s 30A Balance Type","option1":"3s 30A Balance Type","option2":null,"option3":null,"sku":"X40351","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580410439,"product_id":4332921552967,"position":4,"created_at":"2020-05-05T16:26:23+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","variant_ids":[31100138160199]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 30A Balance Type","public_title":"3s 30A Balance Type","options":["3s 30A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138192967,"title":"3s 60A standard Type","option1":"3s 60A standard Type","option2":null,"option3":null,"sku":"X40353","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581164103,"product_id":4332921552967,"position":7,"created_at":"2020-05-05T16:26:35+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","variant_ids":[31100138192967]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A standard Type","public_title":"3s 60A standard Type","options":["3s 60A standard Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138225735,"title":"3s 60A Balance Type","option1":"3s 60A Balance Type","option2":null,"option3":null,"sku":"X40354","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581426247,"product_id":4332921552967,"position":8,"created_at":"2020-05-05T16:26:39+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","variant_ids":[31100138225735]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A Balance Type","public_title":"3s 60A Balance Type","options":["3s 60A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138258503,"title":"4s 40A Balance Type","option1":"4s 40A Balance Type","option2":null,"option3":null,"sku":"040298","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580770887,"product_id":4332921552967,"position":5,"created_at":"2020-05-05T16:26:27+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","variant_ids":[31100138258503]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 4s 40A Balance Type","public_title":"4s 40A Balance Type","options":["4s 40A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","options":["Type"],"media":[{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764205639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764631623,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764992071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765778503,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766696007,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766827079,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679767482439,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $9.99{"id":4332921552967,"title":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced","handle":"3s-60a-30a-4s-40a-li-ion-lithium-battery-charger-protection-board-bms-3s-4s-for-drill-motor-16-8v-battery-balancer-power-bank","description":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e","published_at":"2019-11-01T12:23:38+08:00","created_at":"2019-11-01T12:24:22+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31100138160199,"title":"3s 30A Balance Type","option1":"3s 30A Balance Type","option2":null,"option3":null,"sku":"X40351","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580410439,"product_id":4332921552967,"position":4,"created_at":"2020-05-05T16:26:23+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","variant_ids":[31100138160199]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 30A Balance Type","public_title":"3s 30A Balance Type","options":["3s 30A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138192967,"title":"3s 60A standard Type","option1":"3s 60A standard Type","option2":null,"option3":null,"sku":"X40353","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581164103,"product_id":4332921552967,"position":7,"created_at":"2020-05-05T16:26:35+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","variant_ids":[31100138192967]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A standard Type","public_title":"3s 60A standard Type","options":["3s 60A standard Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138225735,"title":"3s 60A Balance Type","option1":"3s 60A Balance Type","option2":null,"option3":null,"sku":"X40354","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581426247,"product_id":4332921552967,"position":8,"created_at":"2020-05-05T16:26:39+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","variant_ids":[31100138225735]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A Balance Type","public_title":"3s 60A Balance Type","options":["3s 60A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138258503,"title":"4s 40A Balance Type","option1":"4s 40A Balance Type","option2":null,"option3":null,"sku":"040298","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580770887,"product_id":4332921552967,"position":5,"created_at":"2020-05-05T16:26:27+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","variant_ids":[31100138258503]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 4s 40A Balance Type","public_title":"4s 40A Balance Type","options":["4s 40A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","options":["Type"],"media":[{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764205639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764631623,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764992071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765778503,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766696007,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766827079,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679767482439,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $5.99{"id":4332921552967,"title":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced","handle":"3s-60a-30a-4s-40a-li-ion-lithium-battery-charger-protection-board-bms-3s-4s-for-drill-motor-16-8v-battery-balancer-power-bank","description":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e","published_at":"2019-11-01T12:23:38+08:00","created_at":"2019-11-01T12:24:22+08:00","vendor":"diymore","type":"Battery protection board","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31100138160199,"title":"3s 30A Balance Type","option1":"3s 30A Balance Type","option2":null,"option3":null,"sku":"X40351","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580410439,"product_id":4332921552967,"position":4,"created_at":"2020-05-05T16:26:23+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","variant_ids":[31100138160199]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 30A Balance Type","public_title":"3s 30A Balance Type","options":["3s 30A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138192967,"title":"3s 60A standard Type","option1":"3s 60A standard Type","option2":null,"option3":null,"sku":"X40353","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581164103,"product_id":4332921552967,"position":7,"created_at":"2020-05-05T16:26:35+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","variant_ids":[31100138192967]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A standard Type","public_title":"3s 60A standard Type","options":["3s 60A standard Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138225735,"title":"3s 60A Balance Type","option1":"3s 60A Balance Type","option2":null,"option3":null,"sku":"X40354","requires_shipping":true,"taxable":true,"featured_image":{"id":14506581426247,"product_id":4332921552967,"position":8,"created_at":"2020-05-05T16:26:39+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","variant_ids":[31100138225735]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 3s 60A Balance Type","public_title":"3s 60A Balance Type","options":["3s 60A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31100138258503,"title":"4s 40A Balance Type","option1":"4s 40A Balance Type","option2":null,"option3":null,"sku":"040298","requires_shipping":true,"taxable":true,"featured_image":{"id":14506580770887,"product_id":4332921552967,"position":5,"created_at":"2020-05-05T16:26:27+08:00","updated_at":"2020-05-05T16:26:50+08:00","alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","variant_ids":[31100138258503]},"available":true,"name":"3S 30A 18650 Li-ion Lithium Battery BMS PCB Protection Board Balanced\/Enhanced - 4s 40A Balance Type","public_title":"4s 40A Balance Type","options":["4s 40A Balance Type"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","options":["Type"],"media":[{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764205639,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_7_200.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764631623,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_bc43c586-4576-4f6a-af41-eb085ee025cb_327.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679764992071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/112_775.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765221447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40351_3s_30A_170.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765581895,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_2_438.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765778503,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6b0cd5e7-8e2c-413e-b056-4f28e7faed05_462.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679765975111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40353_3s_60A_842.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766237255,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X40354_3S_60A_765.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766696007,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_4_280.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679766827079,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040298_5_935.jpg?v=1588667210","width":1000},{"alt":"3S 60A\/30A 4S 40A Li-Ion Lithium Battery Charger Protection Board Bms 3S\/4S For Drill Motor 16.8V","id":6679767482439,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9d238879-9a97-4c91-be36-776aa7d8f093_984.jpg?v=1588667210","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 60A lithium battery protection board \u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eScope: Suitable for lithium battery with 3.7V nominal voltage and 4.2V limited charge voltage. (includes 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V - 13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 15A\u003c\/p\u003e\n\u003cp\u003eEnhanced version: suitable for electric drill with starting current below 120A and power below 260W .(without balanced charging function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for electric drill with starting current below 120A and power below 260W .(with balanced charging function)\u003c\/p\u003e\n\u003cp\u003eNote 1: To successful starting the drill requires three 10C-20C power batteries, or six 5C-10C power batteries ( recommended battery:SONY VTC4,VTC4A,VTC5A,VTC6).Ordinary 18650 battery can not start the drill!Requires 0V and 12.6V copper wire which is no less than 4SQMM(Can not use nickel!!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: Do not deliberately make it short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the battery is charging,the \"430\" resistance heating is normal,it means the balance circuit is working.If the \"430\" resistance is also heating without charging,please check if the wrong wire is connected.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e3S 30A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eFeture:\u003c\/p\u003e\n\u003cp\u003eScope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 12.6V-13.6V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 30A If the heat dissipation environment is not good, please reduce the load current.\u003c\/p\u003e\n\u003cp\u003eContinuous charging current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eStandard version: Suitable for electric drills with a starting current of 60A or less, power below 130W, or resistive loads below 378W\u003c\/p\u003e\n\u003cp\u003eEquilibrium version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378 with balanced charging function.\u003c\/p\u003e\n\u003cp\u003eNote 1: Three 10C-20C power batteries or six 5C-10C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)\u003c\/p\u003e\n\u003cp\u003eNote 2: do not intentionally short circuit\u003c\/p\u003e\n\u003cp\u003eNote 3: When soldering the battery for the first time or charging, as long as the single battery exceeds 4.2V, the 430 resistor will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e4S 16.8V 40A lithium battery protection board\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eScope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)\u003c\/p\u003e\n\u003cp\u003eCharging voltage: 16.8V - 18.1V\u003c\/p\u003e\n\u003cp\u003eContinuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)\u003c\/p\u003e\n\u003cp\u003eContinuous charge current (upper limit): 20A\u003c\/p\u003e\n\u003cp\u003eNote:this item is Balanced version.If you need other Version,please contact us.The 3 version price is different\u003c\/p\u003e\n\u003cp\u003eStandard version: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eEnhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)\u003c\/p\u003e\n\u003cp\u003eBalanced version: suitable for starting current below 80A, power 220W below the drill.(with balance)\u003c\/p\u003e\n\u003cp\u003eEnhanced version Purchase link:Please click here\u003c\/p\u003e\n\u003cp\u003eNote 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).\u003c\/p\u003e\n\u003cp\u003eNote 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.\u003c\/p\u003e\n\u003cp\u003eNote 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.\u003c\/p\u003e\n\u003cp\u003eNote 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.\u003c\/p\u003e"}
