EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino
EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino
SKU:010245
Regular price
$4.99
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Overview:
Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.
Features:
Package Included:
1*EasyDriver Stepper Motor Driver V44 A3967
- The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
- EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.
- The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!
- EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min/max adjustment.
- This is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.
Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.
Features:
- A3967 microstepping driver
- MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)
- Compatible with 4, 6, and 8 wire stepper motors of any voltage
- Adjustable current control from 150mA/phase to 750mA/phase
- Power supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds
Package Included:
1*EasyDriver Stepper Motor Driver V44 A3967
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $5.99{"id":1800912568378,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2018-08-07T17:52:03+08:00","created_at":"2018-08-07T17:53:47+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17436447113274,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010245","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","options":["Title"],"media":[{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678592946247,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593044551,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593142855,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593208391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593273927,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593306695,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593372231,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593437767,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}
-
Translation missing: en.products.product.regular_price $23.99{"id":1800912568378,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2018-08-07T17:52:03+08:00","created_at":"2018-08-07T17:53:47+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17436447113274,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010245","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","options":["Title"],"media":[{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678592946247,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593044551,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593142855,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593208391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593273927,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593306695,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593372231,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593437767,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}
-
Translation missing: en.products.product.regular_price $5.99{"id":1800912568378,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2018-08-07T17:52:03+08:00","created_at":"2018-08-07T17:53:47+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17436447113274,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010245","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","options":["Title"],"media":[{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678592946247,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593044551,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593142855,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593208391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593273927,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593306695,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593372231,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593437767,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}
-
Translation missing: en.products.product.regular_price $7.99{"id":1800912568378,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2018-08-07T17:52:03+08:00","created_at":"2018-08-07T17:53:47+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17436447113274,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010245","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","options":["Title"],"media":[{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678592946247,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593044551,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593142855,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593208391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593273927,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593306695,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593372231,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593437767,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}
-
Translation missing: en.products.product.regular_price $9.99{"id":1800912568378,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2018-08-07T17:52:03+08:00","created_at":"2018-08-07T17:53:47+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17436447113274,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010245","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","options":["Title"],"media":[{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678592946247,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593044551,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593142855,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593208391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593273927,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593306695,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593372231,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593437767,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}
-
Translation missing: en.products.product.regular_price $5.99{"id":1800912568378,"title":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","handle":"easydriver-shield-stepping-stepper-motor-driver-v44-a3967-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967","published_at":"2018-08-07T17:52:03+08:00","created_at":"2018-08-07T17:53:47+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17436447113274,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010245","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"EasyDriver Shield Stepping Stepper Motor Driver V44 A3967 for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","options":["Title"],"media":[{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678592946247,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_1_838.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593044551,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_2_775.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593142855,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_3_675.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593208391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_4_294.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593273927,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_5_738.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593306695,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_6_406.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593372231,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_7_195.jpg?v=1588650594","width":1000},{"alt":"Easydriver Shield Stepping Stepper Motor Driver V44 A3967 For Arduino Module","id":6678593437767,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010245_8_148.jpg?v=1588650594","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).\u003c\/li\u003e\n\u003cli\u003eEasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor.\u003c\/li\u003e\n\u003cli\u003eThe EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!\u003c\/li\u003e\n\u003cli\u003eEasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. On this version (v4.4) we fixed the silk error on the min\/max adjustment.\u003c\/li\u003e\n\u003cli\u003eThis is the newest version of EasyDriver V4. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA3967 microstepping driver\u003c\/li\u003e\n\u003cli\u003eMS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)\u003c\/li\u003e\n\u003cli\u003eCompatible with 4, 6, and 8 wire stepper motors of any voltage\u003c\/li\u003e\n\u003cli\u003eAdjustable current control from 150mA\/phase to 750mA\/phase\u003c\/li\u003e\n\u003cli\u003ePower supply range from 7V to 30V. The higher the voltage, the higher the torque at high speeds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*EasyDriver Stepper Motor Driver V44 A3967"}