Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino
Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino
SKU:010189
Regular price
$3.99
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Feature:
- Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;
- 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;
- Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;
- Micro SD card connector: yes since the bomb deck for easy card insertion and removal.
- Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;
- Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write
- The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.
- Support Micro SD Card, Micro SDHC card (high-speed card)
- the level conversion circuit board that can interface level is 5V or 3.3V
- power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
- Communication interface is a standard SPI interface
- 4 M2 screw positioning holes for easy installation
- 1 x Micor SD TF Card Shield Expansion Board for Arduino
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
$5.99{"id":1788060336186,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-02T19:00:06+08:00","created_at":"2018-08-02T19:05:39+08:00","vendor":"diymore","type":"TF Card Module","tags":["Arduino","Shield"],"price":399,"price_min":399,"price_max":699,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32645198086215,"title":"1pcs","option1":"1pcs","option2":null,"option3":null,"sku":"010189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 1pcs","public_title":"1pcs","options":["1pcs"],"price":399,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32645198118983,"title":"5pcs","option1":"5pcs","option2":null,"option3":null,"sku":"0101895","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 5pcs","public_title":"5pcs","options":["5pcs"],"price":699,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","options":["Size"],"media":[{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557491271,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","width":1000},{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557524039,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
$23.99{"id":1788060336186,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-02T19:00:06+08:00","created_at":"2018-08-02T19:05:39+08:00","vendor":"diymore","type":"TF Card Module","tags":["Arduino","Shield"],"price":399,"price_min":399,"price_max":699,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32645198086215,"title":"1pcs","option1":"1pcs","option2":null,"option3":null,"sku":"010189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 1pcs","public_title":"1pcs","options":["1pcs"],"price":399,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32645198118983,"title":"5pcs","option1":"5pcs","option2":null,"option3":null,"sku":"0101895","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 5pcs","public_title":"5pcs","options":["5pcs"],"price":699,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","options":["Size"],"media":[{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557491271,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","width":1000},{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557524039,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
$5.99{"id":1788060336186,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-02T19:00:06+08:00","created_at":"2018-08-02T19:05:39+08:00","vendor":"diymore","type":"TF Card Module","tags":["Arduino","Shield"],"price":399,"price_min":399,"price_max":699,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32645198086215,"title":"1pcs","option1":"1pcs","option2":null,"option3":null,"sku":"010189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 1pcs","public_title":"1pcs","options":["1pcs"],"price":399,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32645198118983,"title":"5pcs","option1":"5pcs","option2":null,"option3":null,"sku":"0101895","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 5pcs","public_title":"5pcs","options":["5pcs"],"price":699,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","options":["Size"],"media":[{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557491271,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","width":1000},{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557524039,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
$7.99{"id":1788060336186,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-02T19:00:06+08:00","created_at":"2018-08-02T19:05:39+08:00","vendor":"diymore","type":"TF Card Module","tags":["Arduino","Shield"],"price":399,"price_min":399,"price_max":699,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32645198086215,"title":"1pcs","option1":"1pcs","option2":null,"option3":null,"sku":"010189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 1pcs","public_title":"1pcs","options":["1pcs"],"price":399,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32645198118983,"title":"5pcs","option1":"5pcs","option2":null,"option3":null,"sku":"0101895","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 5pcs","public_title":"5pcs","options":["5pcs"],"price":699,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","options":["Size"],"media":[{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557491271,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","width":1000},{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557524039,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
$9.99{"id":1788060336186,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-02T19:00:06+08:00","created_at":"2018-08-02T19:05:39+08:00","vendor":"diymore","type":"TF Card Module","tags":["Arduino","Shield"],"price":399,"price_min":399,"price_max":699,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32645198086215,"title":"1pcs","option1":"1pcs","option2":null,"option3":null,"sku":"010189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 1pcs","public_title":"1pcs","options":["1pcs"],"price":399,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32645198118983,"title":"5pcs","option1":"5pcs","option2":null,"option3":null,"sku":"0101895","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 5pcs","public_title":"5pcs","options":["5pcs"],"price":699,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","options":["Size"],"media":[{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557491271,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","width":1000},{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557524039,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
$5.99{"id":1788060336186,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-02T19:00:06+08:00","created_at":"2018-08-02T19:05:39+08:00","vendor":"diymore","type":"TF Card Module","tags":["Arduino","Shield"],"price":399,"price_min":399,"price_max":699,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32645198086215,"title":"1pcs","option1":"1pcs","option2":null,"option3":null,"sku":"010189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 1pcs","public_title":"1pcs","options":["1pcs"],"price":399,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32645198118983,"title":"5pcs","option1":"5pcs","option2":null,"option3":null,"sku":"0101895","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 5pcs","public_title":"5pcs","options":["5pcs"],"price":699,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","options":["Size"],"media":[{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557491271,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","width":1000},{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557524039,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e"}