CC2531 Zigbee CC2540 Sniffer Wireless Bluetooth 4.0 Downloader Cable CC Debugger

CC2531 Zigbee CC2540 Sniffer Wireless Bluetooth 4.0 Downloader Cable CC Debugger

SKU:012546
Regular price Sale price $9.99 USD

  
  • Size:4.1*1.6cm
  • Board Thickness:1.6mm
  • Operating Frequency:2.405-2.485GHz
  • Wireless Transmission Speed Rate:1Mbps
  • Power Cosumption:<20mA (receiving);<25mA (transmission)
 

Features:

  • Lead Out 8 IO Ports
  • Debug Pin
  • Matching Different Firmware (Sniffer And BTool) To Achieve Bluetooth Adapter And Protocol Analyzer Function
  • The Dongle Can Be Used As Mini Bluetooth 4.0 Development Board

Note : Need the document , contact us :)

Use as follows:

  • The Packet Sniffer is installed on the computer and the software can be downloaded
  • after the installation is complete open the software, select BLUETOOTH LOW ENERGY,
  • click "start" to enter, insert CC2540 Sniffer USB dongle device, the software will recognize,
  • select, click on the triangle, began to catch the air
  •  At this time we can carry out the agreement analysis.
  • Some customers will use CC2540 to do DONGLE use, this time the device will need to burn CC2540_USBdongle_HostTestRelease_All.hex, open BTOOL after use.     

  

    

   

1.Size: 4.1*1.6cm
2.Board Thickness:1.6mm
3.Operating Frequency:2.405-2.485GHz
4.Wireless Transmission Speed Rate:250Kbaud
5.Power Consumption:<20mA (receiving);<25mA (transmission)


Features:
1.Lead Out 8 IO Ports
2.Debug Pin
3.Matching Firmware To Achieve Analyzer Function

    

1.Length:29.65mm
2.Width:27.46mm
3.Height:10.95mm

Downloader Cable Bluetooth 4.0 CC2540 zigbee CC2531 Sniffer USB Programmer Wire Download Programming Connector 

 

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips.
It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging
And SmartRF Flash Programmer for flash programming.
The CC Debugger can also be used for controlling selected devices from SmartRF Studio.

 

Features:
1>. Contents in the box:
CC Debugger
Mini USB cable
10-pin flat cable with 2.54mm connector
2>. CC-Debugger can be used to program and debug the following 8051-based system-on-chips from Texas Instruments:
CC1110, CC1111
CC2430, CC2431
CC2510, CC2511
CC2530, CC2531, CC2533
CC2540, CC2541
CC2543, CC2544, CC2545
3>. It is possible to control the same devices from SmartRF Studio. In addition, CC-Debugger can control the following transceivers from SmartRF Studio:
CC1120, CC1121, CC1125, CC1175
CC1100, CC1101, CC110L, CC113L, CC115L
CC2500, CC2520
4>. It can also be used to program the PurePath Wireless devices:
CC8520, CC8521
CC8530, CC8531
5>. The CC Debugger works with IAR EW8051 version 7.51A or later

 


1.Size: 4.1*1.6cm
2.Board Thickness:1.6mm
3.Operating Frequency:2.405-2.485GHz
4.Wireless Transmission Speed Rate:250Kbaud
5.Power Consumption:<20mA (receiving);<25mA (transmission)


Features:


1.Lead Out 8 IO Ports 
2.Debug Pin
3.Matching Firmware To Achieve Analyzer Function

 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

  
  • Size:4.1*1.6cm
  • Board Thickness:1.6mm
  • Operating Frequency:2.405-2.485GHz
  • Wireless Transmission Speed Rate:1Mbps
  • Power Cosumption:<20mA (receiving);<25mA (transmission)
 

Features:

  • Lead Out 8 IO Ports
  • Debug Pin
  • Matching Different Firmware (Sniffer And BTool) To Achieve Bluetooth Adapter And Protocol Analyzer Function
  • The Dongle Can Be Used As Mini Bluetooth 4.0 Development Board

Note : Need the document , contact us :)

Use as follows:

  • The Packet Sniffer is installed on the computer and the software can be downloaded
  • after the installation is complete open the software, select BLUETOOTH LOW ENERGY,
  • click "start" to enter, insert CC2540 Sniffer USB dongle device, the software will recognize,
  • select, click on the triangle, began to catch the air
  •  At this time we can carry out the agreement analysis.
  • Some customers will use CC2540 to do DONGLE use, this time the device will need to burn CC2540_USBdongle_HostTestRelease_All.hex, open BTOOL after use.     

  

    

   

1.Size: 4.1*1.6cm
2.Board Thickness:1.6mm
3.Operating Frequency:2.405-2.485GHz
4.Wireless Transmission Speed Rate:250Kbaud
5.Power Consumption:<20mA (receiving);<25mA (transmission)


Features:
1.Lead Out 8 IO Ports
2.Debug Pin
3.Matching Firmware To Achieve Analyzer Function

    

1.Length:29.65mm
2.Width:27.46mm
3.Height:10.95mm

Downloader Cable Bluetooth 4.0 CC2540 zigbee CC2531 Sniffer USB Programmer Wire Download Programming Connector 

 

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips.
It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging
And SmartRF Flash Programmer for flash programming.
The CC Debugger can also be used for controlling selected devices from SmartRF Studio.

 

Features:
1>. Contents in the box:
CC Debugger
Mini USB cable
10-pin flat cable with 2.54mm connector
2>. CC-Debugger can be used to program and debug the following 8051-based system-on-chips from Texas Instruments:
CC1110, CC1111
CC2430, CC2431
CC2510, CC2511
CC2530, CC2531, CC2533
CC2540, CC2541
CC2543, CC2544, CC2545
3>. It is possible to control the same devices from SmartRF Studio. In addition, CC-Debugger can control the following transceivers from SmartRF Studio:
CC1120, CC1121, CC1125, CC1175
CC1100, CC1101, CC110L, CC113L, CC115L
CC2500, CC2520
4>. It can also be used to program the PurePath Wireless devices:
CC8520, CC8521
CC8530, CC8531
5>. The CC Debugger works with IAR EW8051 version 7.51A or later

 


1.Size: 4.1*1.6cm
2.Board Thickness:1.6mm
3.Operating Frequency:2.405-2.485GHz
4.Wireless Transmission Speed Rate:250Kbaud
5.Power Consumption:<20mA (receiving);<25mA (transmission)


Features:


1.Lead Out 8 IO Ports 
2.Debug Pin
3.Matching Firmware To Achieve Analyzer Function