NRF24L01+2.4GHz RF Wireless Transceiver + 8/10 Pin Socket Adapter Plate Board

NRF24L01+2.4GHz RF Wireless Transceiver + 8/10 Pin Socket Adapter Plate Board

SKU:040005
Regular price $5.99 USD


Adapter module

This module can be any one of 51 shop is directly connected to the system board, easy to use.
It's for 8 Pin NRF24L01+ Module
This is a simple socket board which is for NRF24L01 Wireless module
on-board AMS1117-3.3 chip

NRF24L01+ 2.4G wireless module 8PIN

Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
125 Channels, Multi-point communication and frequency hopping to meet the communication needs
Built-in hardware CRC error detection, Multipoint communication address control.
Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
Built-in 2.4Ghz antenna
Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
Built-in voltage regulator
Standard DIP Pitch Interface for embedded applications
size: 34mm X 17mm X 1mm


NRF24L01+PA+LNA SMA Antenna Wireless Transceiver communication module

This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What\'s more, this nRF24L01+ module is designed with Power amplifier and SMA antenna. This allowed you to use the wireless communication up to 1100 meters! (No barrier)
Frequence: 2.4GHz~2.5GHz
Operating voltage: 3 ~ 3.6V Max
Current: 115mA
Multi-frequency: 125 frequency
Support up to six channels of data reception

NRF24L01 Wireless Transceiver Module SMA Antenna
1. 2 Mbit / s rate of the peak current of 12.5mA received
2. In the 2Mbit / s rate @ 0dBm output peak current of 11mA
3. 400nA power down mode
4. 32uA standby mode power consumption
5.130us fast switching and wake-up time
6. With on-chip voltage regulator oltage regulators
7. In the 1.9 to 3.6V low voltage operation
8. MultiCeiverMT hardware provides simultaneous six receiver functions, 2Mbit / s high-quality VoIP makes it possible to
9. 130 us quickly switch and wake time
10. Has the on-chip voltage regulator oltage regulators
11. Can work at 1.9 to 3.6 V low voltage
Mouse, keyboard, wireless headsets, smart sports equipment, remote controls, voice applications, safety devices, VOIP applications,
remote control, telemetry, wireless meter reading, access control, systems, paging, industrial data acquisition systems, wireless tag. Identification, RF contactless smart cards, small wireless data terminals, fire safety systems, wireless remote control system. Systems, bio-signal acquisition, wireless 232, wireless 422/485 data communications.


trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155


Adapter module

This module can be any one of 51 shop is directly connected to the system board, easy to use.
It's for 8 Pin NRF24L01+ Module
This is a simple socket board which is for NRF24L01 Wireless module
on-board AMS1117-3.3 chip

NRF24L01+ 2.4G wireless module 8PIN

Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
125 Channels, Multi-point communication and frequency hopping to meet the communication needs
Built-in hardware CRC error detection, Multipoint communication address control.
Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
Built-in 2.4Ghz antenna
Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
Built-in voltage regulator
Standard DIP Pitch Interface for embedded applications
size: 34mm X 17mm X 1mm


NRF24L01+PA+LNA SMA Antenna Wireless Transceiver communication module

This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What\'s more, this nRF24L01+ module is designed with Power amplifier and SMA antenna. This allowed you to use the wireless communication up to 1100 meters! (No barrier)
Frequence: 2.4GHz~2.5GHz
Operating voltage: 3 ~ 3.6V Max
Current: 115mA
Multi-frequency: 125 frequency
Support up to six channels of data reception

NRF24L01 Wireless Transceiver Module SMA Antenna
1. 2 Mbit / s rate of the peak current of 12.5mA received
2. In the 2Mbit / s rate @ 0dBm output peak current of 11mA
3. 400nA power down mode
4. 32uA standby mode power consumption
5.130us fast switching and wake-up time
6. With on-chip voltage regulator oltage regulators
7. In the 1.9 to 3.6V low voltage operation
8. MultiCeiverMT hardware provides simultaneous six receiver functions, 2Mbit / s high-quality VoIP makes it possible to
9. 130 us quickly switch and wake time
10. Has the on-chip voltage regulator oltage regulators
11. Can work at 1.9 to 3.6 V low voltage
Mouse, keyboard, wireless headsets, smart sports equipment, remote controls, voice applications, safety devices, VOIP applications,
remote control, telemetry, wireless meter reading, access control, systems, paging, industrial data acquisition systems, wireless tag. Identification, RF contactless smart cards, small wireless data terminals, fire safety systems, wireless remote control system. Systems, bio-signal acquisition, wireless 232, wireless 422/485 data communications.