Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro

Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module

18650 Battery Shield V8 Mobile Power Bank 3V/5V for Arduino ESP32 ESP8266

$5.99 USD

{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}

Micro USB Wemos ESP32 18650 Battery Shield V3 ESP-32 for Arduino Raspberry Pi

$7.99 USD

{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}

Atmega328P Ch340G Uno R3 Board Mini Usb Compatible With Arduino Motherboard

UNO R3 ATmega328P CH340G Replace ATmega16U2 Mini USB Board for Arduino DIY

$7.99 USD

{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}

BEETLE BadUSB Micro ATMEGA32U4-AU Development Expansion Module Board For Arduino Leonardo R3 5V I2C

$47.99 USD

{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}

STM32F4 Discovery STM32F407VGT6 Microcontroller 32bit Flash MCU ARM Cortex M4 Core Development Board

$15.10 USD

{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}

Mini USB Nano V3.0 ATmega328 Micro-controller 16M 5V CH340G board for Arduino

$5.99 USD

{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}

Compare Box
Images
Name
Price
Vendor
Type
Variant
Available
Remove
Detail

Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini

Purchasing & Delivery

Picking up at the store

Delivery

Login

Reset your password

Register