STM32F103C8T6 ARM STM32 Minimum System Development BoardST-Link V2 Downloader

STM32F103C8T6 ARM STM32 Minimum System Development BoardST-Link V2 Downloader

SKU:011044
Regular price $8.99 USD


Product Introduction
This is a core chip based on STM32F103C8T6 ARM core board, features are as follows:
1, the board based on the most basic MCU circuit, 8M and 32768 crystal circuit, USB power supply circuit.
2, the core board is divided into two rows leads to all the I / O port.
3, with SWD simulation debug download interface, simple and convenient, debugging speed.
4, the use of the Mirco USB interface, you can do USB communication and power supply, USB interface, compatible with the ordinary Andrews mobile phone charger interface.
6, RTC crystal Epson brand, easy to start, more stable.
7, with double pin, but the pin does not default welding, the user according to their own application scenarios to choose their own welding direction. If welding is required, please tell the owner.
Keil can be used to compile, IAR compiler, can be downloaded through the J-Link or USART1 procedures, the procedures are the owner and debugging procedures, there are problems can consult the owner.
Chip Description:
1, STM32F103C8T6
Package Type: LQFP;
Number of pins: 48;
Kernel: Cortex-M3;
Operating frequency: 72MHz;
Storage resources: 64K Byte Flash, 20KByte SRAM;
Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports,
Analog-to-digital conversion: 2x ADC (12-bit / 16-channel)
Timers: 3 general timers and 1 advanced timer
Debug Download: Support JTAG / SWD debug interface to download, support for IAP.
2, RT9193: 3.3V regulator chip, the maximum output of 300mA.
Interface description:
1, SWD interface: support for simulation, download and debug.
2, Mirco USB interface: power supply and USB communication, does not support the download.
3, USART1 interface: USART1 can be used to download the program, or use the USART1 for communication.
4, MCU pin interface: leads all I / O port pins, easy to connect with peripherals.
5, 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatment
Other Device Description:
1, Power LED (PWR): Power indicator status, can determine whether the power supply is stable.
2, the user LED (PC13): to facilitate the I / O output test or indicate the program running.
3, start jumping choose programming mode: (1, the user flash memory 2, SRAM 3, system memory).
4, reset button: reset chip for the user program.
5, 8M Crystal: The frequency can be set to make the system clocked at 72MHz.
6,32.768KHz Crystal: Available for built-in RTC, or for calibration.
ST-LINK V2
NOTE: color is randomly!!!

1. support the full range of STM32 SWD debugging interface, a simple 4-wire interface (including power), fast, stable; interface definition housing directly marked! Do not need to read the manual;
2. support the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD etc. are supported); supported software versions as follows:
① ST-LINK Utility 2.0 and 4.2.1 above
② STVD and above
③ STVP 3.2.3 and above
④ IAR EWARM V6.20 and above
⑤ IAR EWSTM8 V1.30 and above
⑥ KEIL RVMDK V4.21 and above
3. support for automatic firmware upgrades to ensure follow-up support ST products. The factory firmware has been upgraded to the latest V2.J17.S4;
4. increase the 5V power output, the output I / O ports are protected afraid of operational errors caused by ST-LINK V2 damage!
5. the interface easy to use copper gilded horns seat pitch of 2.54, with 20CM DuPont line, the line can respond to different target sequence, flexible wiring;
6. the use of U disk aluminum housing protects the motherboard, easy to carry, is not afraid of static electricity, afraid to fall throw touch.
7.with data package, containing: (e-file, disk, and network support Baidu QQ mailbox to send)
1, STLINK / V2 driver;
2, KEIL MDK (4.60) development environment (and other common development environments)
3, IAR STM8 (1401) development environment (and other common development environments)
4, STVD STM8 development environment (and other common development environments)
5, a number of classic STM32 information (including a large number of source code examples and video tutorials)
6, a number of classic STM8 information (including a large number of source code examples and learning experience)


trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155


Product Introduction
This is a core chip based on STM32F103C8T6 ARM core board, features are as follows:
1, the board based on the most basic MCU circuit, 8M and 32768 crystal circuit, USB power supply circuit.
2, the core board is divided into two rows leads to all the I / O port.
3, with SWD simulation debug download interface, simple and convenient, debugging speed.
4, the use of the Mirco USB interface, you can do USB communication and power supply, USB interface, compatible with the ordinary Andrews mobile phone charger interface.
6, RTC crystal Epson brand, easy to start, more stable.
7, with double pin, but the pin does not default welding, the user according to their own application scenarios to choose their own welding direction. If welding is required, please tell the owner.
Keil can be used to compile, IAR compiler, can be downloaded through the J-Link or USART1 procedures, the procedures are the owner and debugging procedures, there are problems can consult the owner.
Chip Description:
1, STM32F103C8T6
Package Type: LQFP;
Number of pins: 48;
Kernel: Cortex-M3;
Operating frequency: 72MHz;
Storage resources: 64K Byte Flash, 20KByte SRAM;
Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports,
Analog-to-digital conversion: 2x ADC (12-bit / 16-channel)
Timers: 3 general timers and 1 advanced timer
Debug Download: Support JTAG / SWD debug interface to download, support for IAP.
2, RT9193: 3.3V regulator chip, the maximum output of 300mA.
Interface description:
1, SWD interface: support for simulation, download and debug.
2, Mirco USB interface: power supply and USB communication, does not support the download.
3, USART1 interface: USART1 can be used to download the program, or use the USART1 for communication.
4, MCU pin interface: leads all I / O port pins, easy to connect with peripherals.
5, 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatment
Other Device Description:
1, Power LED (PWR): Power indicator status, can determine whether the power supply is stable.
2, the user LED (PC13): to facilitate the I / O output test or indicate the program running.
3, start jumping choose programming mode: (1, the user flash memory 2, SRAM 3, system memory).
4, reset button: reset chip for the user program.
5, 8M Crystal: The frequency can be set to make the system clocked at 72MHz.
6,32.768KHz Crystal: Available for built-in RTC, or for calibration.
ST-LINK V2
NOTE: color is randomly!!!

1. support the full range of STM32 SWD debugging interface, a simple 4-wire interface (including power), fast, stable; interface definition housing directly marked! Do not need to read the manual;
2. support the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD etc. are supported); supported software versions as follows:
① ST-LINK Utility 2.0 and 4.2.1 above
② STVD and above
③ STVP 3.2.3 and above
④ IAR EWARM V6.20 and above
⑤ IAR EWSTM8 V1.30 and above
⑥ KEIL RVMDK V4.21 and above
3. support for automatic firmware upgrades to ensure follow-up support ST products. The factory firmware has been upgraded to the latest V2.J17.S4;
4. increase the 5V power output, the output I / O ports are protected afraid of operational errors caused by ST-LINK V2 damage!
5. the interface easy to use copper gilded horns seat pitch of 2.54, with 20CM DuPont line, the line can respond to different target sequence, flexible wiring;
6. the use of U disk aluminum housing protects the motherboard, easy to carry, is not afraid of static electricity, afraid to fall throw touch.
7.with data package, containing: (e-file, disk, and network support Baidu QQ mailbox to send)
1, STLINK / V2 driver;
2, KEIL MDK (4.60) development environment (and other common development environments)
3, IAR STM8 (1401) development environment (and other common development environments)
4, STVD STM8 development environment (and other common development environments)
5, a number of classic STM32 information (including a large number of source code examples and video tutorials)
6, a number of classic STM8 information (including a large number of source code examples and learning experience)