5PCS Rotating Potentiometer Knob Cap Digital Control Module Rotary Encoder Controller Switch 5V Electronic PCB Board Diy Kit

5Pcs Rotating Potentiometer Knob Cap Digital Control Module Rotary Encoder Controller Switch 5V

5PCS Rotating Potentiometer Knob Cap Digital Control Module Rotary Encoder Controller Switch 5V Electronic PCB Board Diy Kit

SKU:0126795
$3.99

Digital control module Rotary encoder module rotating potentiometer knob cap

Working voltage: 5 v

A circle of pulse count: 20

Rotary encoder through rotation direction and reverse direction can count is in the process of the number of output pulse, rotating counter unlike potentiometer, the rotation count there is no limit.Cooperate with the buttons on the rotary encoder, can be reset to the initial state, that is, from zero start counting.


Incremental encoder is a kind of rotation displacement is converted to a series of digital pulse signal of rotary sensors.These pulses are used to control the angular displacement.In Eltra encoder angular displacement of the conversion principle of photoelectric scanning is adopted.Reading system in order to made up of alternating transparent window and opaque window of radial index plate (encoder) on the basis of the rotation, vertical irradiation at the same time be an infrared light source, optical encoder of the image projected on the receiver on the surface.Receiver is covered with a layer of diffraction grating, it has the same window width and encoder.Receiver's job is to feel the disc rotation changes, then the light is converted into the corresponding electric changes.To make low level signal to rise to a higher level, and produces no square pulse interference, it must use electronic circuit to deal with.Reading system usually adopts finite difference method, the two waveform, but different phase difference of 180 ° signal comparison, in order to improve the quality and stability of the output signal.Reading is to the difference of two signals, formed on the basis of eliminating the interference.

Package Incluede :

5 x Modules



trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

Digital control module Rotary encoder module rotating potentiometer knob cap

Working voltage: 5 v

A circle of pulse count: 20

Rotary encoder through rotation direction and reverse direction can count is in the process of the number of output pulse, rotating counter unlike potentiometer, the rotation count there is no limit.Cooperate with the buttons on the rotary encoder, can be reset to the initial state, that is, from zero start counting.


Incremental encoder is a kind of rotation displacement is converted to a series of digital pulse signal of rotary sensors.These pulses are used to control the angular displacement.In Eltra encoder angular displacement of the conversion principle of photoelectric scanning is adopted.Reading system in order to made up of alternating transparent window and opaque window of radial index plate (encoder) on the basis of the rotation, vertical irradiation at the same time be an infrared light source, optical encoder of the image projected on the receiver on the surface.Receiver is covered with a layer of diffraction grating, it has the same window width and encoder.Receiver's job is to feel the disc rotation changes, then the light is converted into the corresponding electric changes.To make low level signal to rise to a higher level, and produces no square pulse interference, it must use electronic circuit to deal with.Reading system usually adopts finite difference method, the two waveform, but different phase difference of 180 ° signal comparison, in order to improve the quality and stability of the output signal.Reading is to the difference of two signals, formed on the basis of eliminating the interference.

Package Incluede :

5 x Modules



Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Other Customers also buy:

  • 5Pcs Rotating Potentiometer Knob Cap Digital Control Module Rotary Encoder Controller Switch 5V 10Cm 40Pin Male To Male/ M-F/f-F Wire Jumper Breadboard Multicolored Dupont Ribbon Cables Kit For
    10cm 40pin Male to Male/ M-F/F-F Wire Jumper Breadboard Multicolored Dupont Ribbon Cables Kit for Arduino
    $5.99
  • 5Pcs Rotating Potentiometer Knob Cap Digital Control Module Rotary Encoder Controller Switch 5V 120Pcs Multicolored 40Pin Male To Female Breadboard Jumper Wires Ribbon Cables Kit Tools
    10/20CM Multi Dupont Male to Female Breadboard Jumper Wire Raspberry Pi Arduino
    $7.99
  • 5Pcs Rotating Potentiometer Knob Cap Digital Control Module Rotary Encoder Controller Switch 5V 20Cm 40Pin Male To Male/ M-F/f-F Wire Jumper Breadboard Multicolored Dupont Ribbon Cables Kit For
    20cm 40pin Male to Male/ M-F/F-F Wire Jumper Breadboard Multicolored Dupont Ribbon Cables Kit for Arduino
    $5.99
  • 5Pcs Rotating Potentiometer Knob Cap Digital Control Module Rotary Encoder Controller Switch 5V 100Pcs 24Awg Tin-Plated Breadboard Pcb Fly Jumper Conductor Wires 1007-24Awg Electrical Cable Tools
    100PCS 24AWG Tin-Plated Breadboard PCB Fly Jumper Conductor Wires 1007-24AWG Electrical Cable
    $4.99
  • 5Pcs Rotating Potentiometer Knob Cap Digital Control Module Rotary Encoder Controller Switch 5V 140Pcs Retardant 2:1 Polyolefin Heat Shrink Tubing Tube Kit Sleeve 5 Size 7Color Tools
    140PCS Retardant 2:1 Polyolefin Heat Shrink Tubing Tube Kit Sleeve 5 Size 7Color
    $6.99
  • 5Pcs Rotating Potentiometer Knob Cap Digital Control Module Rotary Encoder Controller Switch 5V Mb 102 Mb102 Micro Mini Usb Solderless Breadboard Bread Borad Power Supply For Arduino Dc 3.3V 5V
    MB102 Micro Mini USB Solderless BreadBoard Bread Borad Power Supply For Arduino DC 3.3V 5V Module DIY KIT
    $4.99