T-Beam ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 NEO-6M With OLED

T-Beam ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 NEO-6M With OLED

T-Beam ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 NEO-6M With OLED

SKU:XF0107
Regular price $49.99 USD

Product Features

ESP32
  • Lastest ESP32 Version: REV1
  • WIFI
  • Bluetooth 
  • 8MB PSRAM
  • 4MB Flash
  • 3D Antenna
  • LORA
  • Product Description
  • Working voltage: 1.8~3.7v
  • Acceptable current:10~14mA
  • Transmit current: 120mA AT +20dBm
  •                               90mA AT +17dBm
  •                               29mA AT +13dBm
  • Operating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)
  • Transmit power: +20dBm
  • Receive sensitivity :-139dBm AT LoRa &62.5Khz&SF=12&146bps
  • -136dBm AT LoRa &125Khz&SF=12&293bps
  • -118dBm AT LoRa &125Khz&SF=6&9380bps
  • -123dBm AT FSK&5Khz&1.2Kbps
  • Frequency error:+/-15KHz
  • FIFO space :64Byte
  • Data rate :1.2K~300Kbps AT FSK
  •                    0.018K~37.5Kbps AT LoRa        
  • Modulation Mode :FSK,GFSK,MSK,GMSK,LoRa TM,OOK
  • Interface form :SPI
  • Sleep current :0.2uA AT SLEEP
  •                            1.5uA AT IDLE
  • Operating temperature :-40℃- +85℃
  • Digital RSSI function
  • Automatic frequency correction
  • Automatic gain control 
  • Low voltage detection 
  • Fast wake-up and frequency hopping
  • Highly configurable data packet handler
  •  
GPS
  • GPS modules NEO-6M, 3V-5V power supply Universal
  • Destined module with ceramic antenna, signal super
  • Save the configuration parameter data EEPROM Down
  • With data backup battery
  • There are LED signal indicator
  • Default Baud Rate: 9600

Power

  • Power Supply Input USB 5V/1A
  • Charging current 500mA
  • Battery Input  3.7-4.2V
  • Charge IC AXP192
OLED Description:
  • Size:  0.96 inch
  • High resolution: 128 * 64
  • Color:  white
  • Viewing angle:  > 160 °
  • Driver IC:  SSD1306
  • Working temperature:  -30  celcius ~ 80  celcius
  • Module volume (generous):  27.0MM * 27.0MM * 4.1MM
  • Supports many control chip:  Fully compatible with Arduino, 51 series, MSP430 series,STM32/2, CSR chip, etc.  (a lot of routines for reference)
  • Wide voltage support: without any modification, directly supports 3.3V ~ 5V DC
  • Ultra-low power consumption: Normal operation Is 0.04W
  • IO port occupies minimal display: The IIC communication,as long as the two IO ports

More information:

https://github.com/geeksville/Meshtastic-Android/blob/master/README.md

https://github.com/meshtastic/Meshtastic-device/releases\

https://github.com/Xinyuan-LilyGO/LilyGO-T-Beam

Pin Schematic

Size picture

Shipping List

433MHz/868MHz Version

  • 1 X TTGO T-Beam 
  • 1 X 433MHz/868MHz Antenna      
  • 1 X 0.96 inch 128X64  OLED
  • 2 X Pin 
  • Note: OLED is not soldered to T-BEAM
  • 915MHz/923MHz Version
  • 1 X TTGO T-Beam 
  • 1 X 915MHz/923MHz Antenna
  • 1 X 0.96 inch 128X64 OLED
  • 2 X Pin  
  • Note:OLED is not soldered to T-BEAM
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

Product Features

ESP32
  • Lastest ESP32 Version: REV1
  • WIFI
  • Bluetooth 
  • 8MB PSRAM
  • 4MB Flash
  • 3D Antenna
  • LORA
  • Product Description
  • Working voltage: 1.8~3.7v
  • Acceptable current:10~14mA
  • Transmit current: 120mA AT +20dBm
  •                               90mA AT +17dBm
  •                               29mA AT +13dBm
  • Operating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)
  • Transmit power: +20dBm
  • Receive sensitivity :-139dBm AT LoRa &62.5Khz&SF=12&146bps
  • -136dBm AT LoRa &125Khz&SF=12&293bps
  • -118dBm AT LoRa &125Khz&SF=6&9380bps
  • -123dBm AT FSK&5Khz&1.2Kbps
  • Frequency error:+/-15KHz
  • FIFO space :64Byte
  • Data rate :1.2K~300Kbps AT FSK
  •                    0.018K~37.5Kbps AT LoRa        
  • Modulation Mode :FSK,GFSK,MSK,GMSK,LoRa TM,OOK
  • Interface form :SPI
  • Sleep current :0.2uA AT SLEEP
  •                            1.5uA AT IDLE
  • Operating temperature :-40℃- +85℃
  • Digital RSSI function
  • Automatic frequency correction
  • Automatic gain control 
  • Low voltage detection 
  • Fast wake-up and frequency hopping
  • Highly configurable data packet handler
  •  
GPS
  • GPS modules NEO-6M, 3V-5V power supply Universal
  • Destined module with ceramic antenna, signal super
  • Save the configuration parameter data EEPROM Down
  • With data backup battery
  • There are LED signal indicator
  • Default Baud Rate: 9600

Power

  • Power Supply Input USB 5V/1A
  • Charging current 500mA
  • Battery Input  3.7-4.2V
  • Charge IC AXP192
OLED Description:
  • Size:  0.96 inch
  • High resolution: 128 * 64
  • Color:  white
  • Viewing angle:  > 160 °
  • Driver IC:  SSD1306
  • Working temperature:  -30  celcius ~ 80  celcius
  • Module volume (generous):  27.0MM * 27.0MM * 4.1MM
  • Supports many control chip:  Fully compatible with Arduino, 51 series, MSP430 series,STM32/2, CSR chip, etc.  (a lot of routines for reference)
  • Wide voltage support: without any modification, directly supports 3.3V ~ 5V DC
  • Ultra-low power consumption: Normal operation Is 0.04W
  • IO port occupies minimal display: The IIC communication,as long as the two IO ports

More information:

https://github.com/geeksville/Meshtastic-Android/blob/master/README.md

https://github.com/meshtastic/Meshtastic-device/releases\

https://github.com/Xinyuan-LilyGO/LilyGO-T-Beam

Pin Schematic

Size picture

Shipping List

433MHz/868MHz Version

  • 1 X TTGO T-Beam 
  • 1 X 433MHz/868MHz Antenna      
  • 1 X 0.96 inch 128X64  OLED
  • 2 X Pin 
  • Note: OLED is not soldered to T-BEAM
  • 915MHz/923MHz Version
  • 1 X TTGO T-Beam 
  • 1 X 915MHz/923MHz Antenna
  • 1 X 0.96 inch 128X64 OLED
  • 2 X Pin  
  • Note:OLED is not soldered to T-BEAM