AD9833 Programmable Microprocessors Serial Interface Module Sine Square Wave DDS Signal Generator Module

Ad9833 Programmable Microprocessors Serial Interface Module Sine Square Wave Dds Signal Generator

AD9833 Programmable Microprocessors Serial Interface Module Sine Square Wave DDS Signal Generator Module

SKU:011997
Regular price $5.99

 



100% brand new and high quality

General Description:
   The AD9833 is a low power, programmable waveform generator capable of producing sine, triangular, and square wave outputs. Waveform generation is required in various types of sensing, actuation, and time domain reflectometry (TDR) applications. The output frequency and phase are software programmable, allowing easy tuning. No external components are needed. The frequency registers are 28 bits wide: with a 25 MHz clock rate, resolution of 0.1 Hz can be achieved; with a 1 MHz clock rate, the AD9833 can be tuned to 0.004 Hz resolution
    The AD9833 has a standard serial interface that allows the part to interface directly with several microprocessors. The device uses an external serial clock to write the data or control information into the device
    The AD9833WBRMZ-REEL model is available with controlled manufacturing to support the quality and reliability requirements of automotive applications. Note that this automotive model may have specifications that differ from the commercial models; therefore, designers should review the Specifications section of this data sheet carefully. Only the automotive grade product shown is available for use in automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to obtain the specific Automotive Reliability reports for these models
    The AD9833 is written to via a 3-wire serial interface. This serial interface operates at clock rates up to 40 MHz and is compatible with DSP and microcontroller standards. The device operates with a power supply from 2.3 V to 5.5 V
    The AD9833 has a power-down function (SLEEP). This allows sections of the device that are not being used to be powered down, thus minimizing the current consumption of the part, e.g., the DAC can be powered down when a clock output is being generated
   

Features:

    Digitally programmable frequency and phase
    12.65 mW power consumption at 3 V
    0 MHz to 12.5 MHz output frequency range
    28-bit resolution: 0.1 Hz at 25 MHz reference clock
    Sinusoidal, triangular, and square wave outputs
    2.3 V to 5.5 V power supply
    No external components required
    3-wire SPI interface
    Extended temperature range: −40°C to +105°C
    Power-down option                                                          
    Update Rate: 25(max)
    VOUT Maximum: 0.65V
    VOUT Minimum: 38mV
    VOUT Temperature Coefficient: 200°
    Input High Voltage: 1.7-2.8V
    Input Low Voltage: 0.5-0.7V
    Input Current: 10µA
    Input Capacitance: 3pF
    Operating temperature range is −40°C to +105°C; typical specifications are at 25°C
    Size: 17*12mm/0.66*0.47"
    Quantity: 1pc

Package includes:

    1 x Signal Generator Module
 
 










 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 



100% brand new and high quality

General Description:
   The AD9833 is a low power, programmable waveform generator capable of producing sine, triangular, and square wave outputs. Waveform generation is required in various types of sensing, actuation, and time domain reflectometry (TDR) applications. The output frequency and phase are software programmable, allowing easy tuning. No external components are needed. The frequency registers are 28 bits wide: with a 25 MHz clock rate, resolution of 0.1 Hz can be achieved; with a 1 MHz clock rate, the AD9833 can be tuned to 0.004 Hz resolution
    The AD9833 has a standard serial interface that allows the part to interface directly with several microprocessors. The device uses an external serial clock to write the data or control information into the device
    The AD9833WBRMZ-REEL model is available with controlled manufacturing to support the quality and reliability requirements of automotive applications. Note that this automotive model may have specifications that differ from the commercial models; therefore, designers should review the Specifications section of this data sheet carefully. Only the automotive grade product shown is available for use in automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to obtain the specific Automotive Reliability reports for these models
    The AD9833 is written to via a 3-wire serial interface. This serial interface operates at clock rates up to 40 MHz and is compatible with DSP and microcontroller standards. The device operates with a power supply from 2.3 V to 5.5 V
    The AD9833 has a power-down function (SLEEP). This allows sections of the device that are not being used to be powered down, thus minimizing the current consumption of the part, e.g., the DAC can be powered down when a clock output is being generated
   

Features:

    Digitally programmable frequency and phase
    12.65 mW power consumption at 3 V
    0 MHz to 12.5 MHz output frequency range
    28-bit resolution: 0.1 Hz at 25 MHz reference clock
    Sinusoidal, triangular, and square wave outputs
    2.3 V to 5.5 V power supply
    No external components required
    3-wire SPI interface
    Extended temperature range: −40°C to +105°C
    Power-down option                                                          
    Update Rate: 25(max)
    VOUT Maximum: 0.65V
    VOUT Minimum: 38mV
    VOUT Temperature Coefficient: 200°
    Input High Voltage: 1.7-2.8V
    Input Low Voltage: 0.5-0.7V
    Input Current: 10µA
    Input Capacitance: 3pF
    Operating temperature range is −40°C to +105°C; typical specifications are at 25°C
    Size: 17*12mm/0.66*0.47"
    Quantity: 1pc

Package includes:

    1 x Signal Generator Module
 
 










 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.