I.5 inch 128X128 RGB OLED Screen Display Module SSD1351 SPI I2C IIC for Arduino Raspberry Pi STM32

I.5 Inch 128X128 Rgb Oled Screen Display Module Ssd1351 Spi I2C Iic For Arduino Raspberry Pi Stm32

I.5 inch 128X128 RGB OLED Screen Display Module SSD1351 SPI I2C IIC for Arduino Raspberry Pi STM32

SKU:X30637
Regular price $16.99 USD

 

This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.
 
Features:
128x128 high resolution, 65K colors, clearly displays colorful images
Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
 
Specifications:
Driver: SSD1351
Interface: 4-wire SPI, 3-wire SPI
Display color: RGB, 65K colors
Resolution: 128x128
Viewing angle: >160°
Operating voltage: 3.3V / 5V
Dimension: 44.5 x 37 (mm)
 
Interface:
Port    Description
VCC     Power (3.3~5V input)
GND     Ground
DIN     Data input
CLK     Clock data input
CS      Chip selection, low active
DC      4-wire SPI: Data/Command selection (high for data, low for command)
        3-wire SPI: Connects to GND, keeps low
RST     Reset, low active
 
 
There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI:
      BS     DC
4-wire SPI     0     DC
3-wire SPI     1     Connects to GND
 
Package Includes:
1 X 1.5inch OLED Display Module
1 X PH2.0 7P dupond cable
 

 

 

 

 

  

 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 

This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.
 
Features:
128x128 high resolution, 65K colors, clearly displays colorful images
Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
 
Specifications:
Driver: SSD1351
Interface: 4-wire SPI, 3-wire SPI
Display color: RGB, 65K colors
Resolution: 128x128
Viewing angle: >160°
Operating voltage: 3.3V / 5V
Dimension: 44.5 x 37 (mm)
 
Interface:
Port    Description
VCC     Power (3.3~5V input)
GND     Ground
DIN     Data input
CLK     Clock data input
CS      Chip selection, low active
DC      4-wire SPI: Data/Command selection (high for data, low for command)
        3-wire SPI: Connects to GND, keeps low
RST     Reset, low active
 
 
There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI:
      BS     DC
4-wire SPI     0     DC
3-wire SPI     1     Connects to GND
 
Package Includes:
1 X 1.5inch OLED Display Module
1 X PH2.0 7P dupond cable