DC 12V Thermostat Digital LED Temperature Control Switch NTC Waterproof Sensor

DC 12V Thermostat Digital LED Temperature Control Switch NTC Waterproof Sensor

SKU:010617
Regular price $6.99 USD

  • Wide temperature control range: -50 to 110℃(-58℉-230℉);
  • High accuracy: 0.1℃
  • With waterproof sensitive NTC (10K 0.5%) sensor probe as the measuring input.
  • Digital LED Tubes: "LL" indicates sensor open, "HH" indicates overrange, the relay will be forcibly disconnected
  • Long press the "SET" button to enter the main menu settings, press " + or - " to switching between P0-P5,then long press "SET" or 10 seconds without keystrokes to confirm the setting and return
  • Controller automatically performs the relay ON/OFF.the thermostat output is 10A relay, meet a variety of high-power loads

Specifications:

  • Temperature range :-50-110 ℃
  • Temperature control mode: ON / OFF
  • Resolution:When temperature is 0.1℃, the resolution is -9.9~99.9, other temperature segment is 1℃
  • Control accuracy: 0.1 ℃
  • Hysteresis accuracy: 0.1℃
  • Refresh rate: 0.5S
  • High temperature protection: 0-110℃
  • Supply voltage: DC 12V
  • Static current: ≤ 35MA, attract current ≤ 65MA
  • Output voltage: DC 12V
  • Output power: 20A relay 
  • Measurement input: NTC (10K 0.5%) Waterproof Sensor
  • Environmental requirements: -10 ~ 60 ℃ ,Humidity 20% -85%,Sensor Probe Length:1m/39.37inch
  • Dimensions: 1.89X1.57 inch.

How to use:

  • P0 :Cooling/Heating; Range: C/H; Default: C
  • P1 :Hysteresis Setting; Range:0.1-15; Default: 2
  • P2 :Highest Setting Limit; Range:110; Default: 110
  • P3: Lowest setting Limit; Range:-50; Default: -50
  • P4 :Temperature Correction; Range:-7-7℃; Default: 0℃
  • P5: Delay Start Time; Range:0-10 Minute; Default: 0
  • When the Thermostat is power off, long press "- or +", you can restore the factory settings Connect the power supply and the load, you can supply to the controller, Is displayed as a measured temperature
  • Press the SET button, the display flashes the temperature
  • Press - to set the desired temperature
  • After setting press SET to confirm return
  • The controller automatically performs the relay by setting off!
  • Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.
  • LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay.

Parameter Function:

  • Long press SET 5 seconds to enter the main menu settings, press the - toggle P0 ... P5 long press SET or 10 seconds of no key activity confirmed their return to the controller.


Package included:

  • 1x Temperature control switch
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
  • Wide temperature control range: -50 to 110℃(-58℉-230℉);
  • High accuracy: 0.1℃
  • With waterproof sensitive NTC (10K 0.5%) sensor probe as the measuring input.
  • Digital LED Tubes: "LL" indicates sensor open, "HH" indicates overrange, the relay will be forcibly disconnected
  • Long press the "SET" button to enter the main menu settings, press " + or - " to switching between P0-P5,then long press "SET" or 10 seconds without keystrokes to confirm the setting and return
  • Controller automatically performs the relay ON/OFF.the thermostat output is 10A relay, meet a variety of high-power loads

Specifications:

  • Temperature range :-50-110 ℃
  • Temperature control mode: ON / OFF
  • Resolution:When temperature is 0.1℃, the resolution is -9.9~99.9, other temperature segment is 1℃
  • Control accuracy: 0.1 ℃
  • Hysteresis accuracy: 0.1℃
  • Refresh rate: 0.5S
  • High temperature protection: 0-110℃
  • Supply voltage: DC 12V
  • Static current: ≤ 35MA, attract current ≤ 65MA
  • Output voltage: DC 12V
  • Output power: 20A relay 
  • Measurement input: NTC (10K 0.5%) Waterproof Sensor
  • Environmental requirements: -10 ~ 60 ℃ ,Humidity 20% -85%,Sensor Probe Length:1m/39.37inch
  • Dimensions: 1.89X1.57 inch.

How to use:

  • P0 :Cooling/Heating; Range: C/H; Default: C
  • P1 :Hysteresis Setting; Range:0.1-15; Default: 2
  • P2 :Highest Setting Limit; Range:110; Default: 110
  • P3: Lowest setting Limit; Range:-50; Default: -50
  • P4 :Temperature Correction; Range:-7-7℃; Default: 0℃
  • P5: Delay Start Time; Range:0-10 Minute; Default: 0
  • When the Thermostat is power off, long press "- or +", you can restore the factory settings Connect the power supply and the load, you can supply to the controller, Is displayed as a measured temperature
  • Press the SET button, the display flashes the temperature
  • Press - to set the desired temperature
  • After setting press SET to confirm return
  • The controller automatically performs the relay by setting off!
  • Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.
  • LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay.

Parameter Function:

  • Long press SET 5 seconds to enter the main menu settings, press the - toggle P0 ... P5 long press SET or 10 seconds of no key activity confirmed their return to the controller.


Package included:

  • 1x Temperature control switch