12V / 24V 7A 160W Dual DC Motor Driver Module Board H bridge L298 Logic 160W 2 Dual Channel 2CH Optocoupler Isolation 2 Way

12V / 24V 7A 160W Dual Dc Motor Driver Module Board H Bridge L298 Logic 2 Channel 2Ch Optocoupler

12V / 24V 7A 160W Dual DC Motor Driver Module Board H bridge L298 Logic 160W 2 Dual Channel 2CH Optocoupler Isolation 2 Way

SKU:012036
Regular price $10.99


Features:
1, the dual H-bridge;
2, rated 7A / Road
3, optocoupler isolation;
4, undervoltage protection;
5, compact size.
Features:
◆ extremely small size, only 5.5cm × 5.5cm
◆ Support voltage 7V ~ 24V, undervoltage protection
◆ Dual motor interface, each rated output current 7A
◆ L298 similar control logic, each supported by three-wire control is enabled, reversing and braking
◆ enable signal to an external PWM, reversing limit switch control signal can be connected in series
◆ control signal sink drivers, support the vast majority of single-chip direct drive
◆ Use optocoupler isolation for all control signals
◆ electrostatic discharge circuit
Principle Overview:
The H-bridge module gate circuit, motor reversing combination with MOS transistors, braking and speed control. Both have similar large output current L298 flexible logic control signal.
Interference approach: control signal optocoupler isolation, power spike voltage suppression.
Control signal logic: L298 using gates to achieve a similar control logic.
H-bridge Method: Use P, N complementary MOS transistors to achieve the H-bridge.
Power voltage protection: Use reset chip undervoltage protection.
Technical parameters:
Input voltage range: DC 6.5V ~ 27V
Rated input voltage: DC 12V / 24V
Output channels: 2-way
Rated output current per channel: 7A
Peak output current per channel: 50A
Each rated output power: 84W (12V supply) 168W (24V power supply)
The control signal voltage: 3 ~ 6.5V
Each control signal current: 3 ~ 11mA
The minimum effective PWM pulse width: 5us
Working temperature: -25 ° ~ 80 °
Dimensions: 5.5cm × 5.5cm × 2.0cm
Size of 5.5cm × 5.5cm × 2.0cm. Installation hole diameter is 3mm, suggested the use of M3 screws to fix.
Note that when you install, do not let the back of a short circuit, you can add insulation pad or use Tongzhu raise the board.
Package Included:
1 x 12V/24V 7A 160W *2 L298 H-bridge DC Motor Drive Module


trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155


Features:
1, the dual H-bridge;
2, rated 7A / Road
3, optocoupler isolation;
4, undervoltage protection;
5, compact size.
Features:
◆ extremely small size, only 5.5cm × 5.5cm
◆ Support voltage 7V ~ 24V, undervoltage protection
◆ Dual motor interface, each rated output current 7A
◆ L298 similar control logic, each supported by three-wire control is enabled, reversing and braking
◆ enable signal to an external PWM, reversing limit switch control signal can be connected in series
◆ control signal sink drivers, support the vast majority of single-chip direct drive
◆ Use optocoupler isolation for all control signals
◆ electrostatic discharge circuit
Principle Overview:
The H-bridge module gate circuit, motor reversing combination with MOS transistors, braking and speed control. Both have similar large output current L298 flexible logic control signal.
Interference approach: control signal optocoupler isolation, power spike voltage suppression.
Control signal logic: L298 using gates to achieve a similar control logic.
H-bridge Method: Use P, N complementary MOS transistors to achieve the H-bridge.
Power voltage protection: Use reset chip undervoltage protection.
Technical parameters:
Input voltage range: DC 6.5V ~ 27V
Rated input voltage: DC 12V / 24V
Output channels: 2-way
Rated output current per channel: 7A
Peak output current per channel: 50A
Each rated output power: 84W (12V supply) 168W (24V power supply)
The control signal voltage: 3 ~ 6.5V
Each control signal current: 3 ~ 11mA
The minimum effective PWM pulse width: 5us
Working temperature: -25 ° ~ 80 °
Dimensions: 5.5cm × 5.5cm × 2.0cm
Size of 5.5cm × 5.5cm × 2.0cm. Installation hole diameter is 3mm, suggested the use of M3 screws to fix.
Note that when you install, do not let the back of a short circuit, you can add insulation pad or use Tongzhu raise the board.
Package Included:
1 x 12V/24V 7A 160W *2 L298 H-bridge DC Motor Drive Module