12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module
prev
next
12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module
SKU:X12929
Regular price
$5.99
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Description:
- The power supply: 12V
- Module size: 5.3 x 3.2cm/2.09 x 1.26inch
- According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull,
- and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.
- The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot
- be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.
- No retail package
Note:
- Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
- 1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $8.10{"id":4790846521415,"title":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","handle":"12v-car-modification-switch-bond-bistable-relay-start-stop-self-locking-module","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-08-13T11:58:19+08:00","created_at":"2020-08-13T11:58:17+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32506364330055,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12929","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","options":["Title"],"media":[{"alt":null,"id":7276539838535,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539871303,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539904071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539936839,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539969607,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540002375,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540035143,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"} -
Translation missing: en.products.product.regular_price $8.00{"id":4790846521415,"title":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","handle":"12v-car-modification-switch-bond-bistable-relay-start-stop-self-locking-module","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-08-13T11:58:19+08:00","created_at":"2020-08-13T11:58:17+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32506364330055,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12929","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","options":["Title"],"media":[{"alt":null,"id":7276539838535,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539871303,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539904071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539936839,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539969607,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540002375,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540035143,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"} -
Translation missing: en.products.product.regular_price $9.99{"id":4790846521415,"title":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","handle":"12v-car-modification-switch-bond-bistable-relay-start-stop-self-locking-module","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-08-13T11:58:19+08:00","created_at":"2020-08-13T11:58:17+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32506364330055,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12929","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","options":["Title"],"media":[{"alt":null,"id":7276539838535,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539871303,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539904071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539936839,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539969607,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540002375,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540035143,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"} -
Translation missing: en.products.product.regular_price $7.99{"id":4790846521415,"title":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","handle":"12v-car-modification-switch-bond-bistable-relay-start-stop-self-locking-module","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-08-13T11:58:19+08:00","created_at":"2020-08-13T11:58:17+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32506364330055,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12929","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","options":["Title"],"media":[{"alt":null,"id":7276539838535,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539871303,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539904071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539936839,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539969607,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540002375,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540035143,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"} -
Translation missing: en.products.product.regular_price $11.99{"id":4790846521415,"title":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","handle":"12v-car-modification-switch-bond-bistable-relay-start-stop-self-locking-module","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-08-13T11:58:19+08:00","created_at":"2020-08-13T11:58:17+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32506364330055,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12929","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","options":["Title"],"media":[{"alt":null,"id":7276539838535,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539871303,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539904071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539936839,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539969607,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540002375,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540035143,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"} -
Translation missing: en.products.product.regular_price $3.56{"id":4790846521415,"title":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","handle":"12v-car-modification-switch-bond-bistable-relay-start-stop-self-locking-module","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-08-13T11:58:19+08:00","created_at":"2020-08-13T11:58:17+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32506364330055,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12929","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"12V Car Modification Switch Bond Bistable Relay Start Stop Self-Locking Module","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","options":["Title"],"media":[{"alt":null,"id":7276539838535,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_b7508d7a-f6d9-4558-9a05-9e437078ba93.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539871303,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_54237ec7-1d24-409d-953a-fd3cdcde09d8.jpg?v=1597291098","width":1000},{"alt":null,"id":7276539904071,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_4582b806-1ad7-40c3-bd14-0590ef9c3f8d.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539936839,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_e6ac4538-8fc4-4dc6-a329-e50c8092393c.jpg?v=1597291099","width":1000},{"alt":null,"id":7276539969607,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_83de0e94-0702-4b72-a230-43f390e53414.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540002375,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ff20476f-7b7b-4cc5-b398-55db9fb64883.jpg?v=1597291099","width":1000},{"alt":null,"id":7276540035143,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_2aa6a2e4-74e3-4130-a38c-89406e87a133.jpg?v=1597291099","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eThe power supply: 12V\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e No retail package\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n Product Description\n The power supply: 12V\n Module size: 5.3 x 3.2cm\/2.09 x 1.26inch\n According to the board of the key, or an external button to make the relay module to attract or disconnect, click on the pull, \n and then press the button to disconnect, low level trigger. Power on again when the relay is in off state.\n The secondary output end of the relay to withstand the maximum current is 10A, that is the maximum working current cannot \n be accused of a circuit or device is greater than 10A, according to their own needs to be connected to the normally open or normally closed terminal.\n No retail package \n\n Note: \nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Included:\n1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\"\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e1PC*12V Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e"}
