DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b
prev
next
DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b
SKU:XF0097
Regular price
$10.99 USD
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Product introduction:
- Stereo smart Bluetooth receiver board/receiver (power amplifier/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.
- Wide-voltage power supply smart stereo Bluetooth receiver board/receiver, the default volume is the maximum output after power-on/DIY independent button operation/hands-free call/Bluetooth automatic connection/intelligent automatic conversion of AUX input signal/low noise/low sound when starting POPO/Bluetooth Receive ultra-stable and uninterrupted noise/circuit board design is ultra-small and beautiful and exquisite/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.
- Bluetooth specification: Bluetooth V4.O+EDR;
- Transmission power: CLASS2;
- Support Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;
- Hands-free agreement: (1.6);
- Transmission distance: about 15M (open place);
- Power supply voltage: 3.6V to 30V;
- Frequency response: >80Hz-22KHz;
- Signal to noise ratio: >80dB;
- Output power: >600m(-4 dBM)x2CH
- Stereo separation: >50dB
- Channel balance: less than 2dB
- Software description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.
- 1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.
- 2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.
- 3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.
- 4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.
- 5. Power off state: both the blue light and the red light are off.
- Key operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)
- NEXT key: Short press to select the next song being played
- PREV key: Short press to select the previous song being played
- Play/Pause/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.
- One receiving module
- One button board (three buttons), one microphone with line (line length 13CM)
- 2 power cords
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $8.10 USD{"id":6074762592456,"title":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","handle":"dc3-6-30v-car-bluetooth-audio-receiving-module-3-5mm-headphone-jack-input-and-output-b","description":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-11-09T15:57:47+08:00","created_at":"2020-11-09T15:57:44+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1099,"price_min":1099,"price_max":1099,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37496807981256,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0097","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","public_title":null,"options":["Default Title"],"price":1099,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","options":["Title"],"media":[{"alt":null,"id":14878581424328,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581457096,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581489864,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581522632,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581555400,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581588168,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e"} -
Translation missing: en.products.product.regular_price $8.00 USD{"id":6074762592456,"title":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","handle":"dc3-6-30v-car-bluetooth-audio-receiving-module-3-5mm-headphone-jack-input-and-output-b","description":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-11-09T15:57:47+08:00","created_at":"2020-11-09T15:57:44+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1099,"price_min":1099,"price_max":1099,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37496807981256,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0097","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","public_title":null,"options":["Default Title"],"price":1099,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","options":["Title"],"media":[{"alt":null,"id":14878581424328,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581457096,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581489864,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581522632,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581555400,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581588168,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e"} -
Translation missing: en.products.product.regular_price $9.99 USD{"id":6074762592456,"title":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","handle":"dc3-6-30v-car-bluetooth-audio-receiving-module-3-5mm-headphone-jack-input-and-output-b","description":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-11-09T15:57:47+08:00","created_at":"2020-11-09T15:57:44+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1099,"price_min":1099,"price_max":1099,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37496807981256,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0097","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","public_title":null,"options":["Default Title"],"price":1099,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","options":["Title"],"media":[{"alt":null,"id":14878581424328,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581457096,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581489864,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581522632,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581555400,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581588168,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e"} -
Translation missing: en.products.product.regular_price $7.99 USD{"id":6074762592456,"title":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","handle":"dc3-6-30v-car-bluetooth-audio-receiving-module-3-5mm-headphone-jack-input-and-output-b","description":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-11-09T15:57:47+08:00","created_at":"2020-11-09T15:57:44+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1099,"price_min":1099,"price_max":1099,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37496807981256,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0097","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","public_title":null,"options":["Default Title"],"price":1099,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","options":["Title"],"media":[{"alt":null,"id":14878581424328,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581457096,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581489864,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581522632,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581555400,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581588168,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e"} -
Translation missing: en.products.product.regular_price $11.99 USD{"id":6074762592456,"title":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","handle":"dc3-6-30v-car-bluetooth-audio-receiving-module-3-5mm-headphone-jack-input-and-output-b","description":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-11-09T15:57:47+08:00","created_at":"2020-11-09T15:57:44+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1099,"price_min":1099,"price_max":1099,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37496807981256,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0097","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","public_title":null,"options":["Default Title"],"price":1099,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","options":["Title"],"media":[{"alt":null,"id":14878581424328,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581457096,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581489864,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581522632,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581555400,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581588168,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e"} -
Translation missing: en.products.product.regular_price $3.56 USD{"id":6074762592456,"title":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","handle":"dc3-6-30v-car-bluetooth-audio-receiving-module-3-5mm-headphone-jack-input-and-output-b","description":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-11-09T15:57:47+08:00","created_at":"2020-11-09T15:57:44+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1099,"price_min":1099,"price_max":1099,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37496807981256,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0097","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC3.6-30V car bluetooth audio receiving module 3.5MM headphone jack input and output b","public_title":null,"options":["Default Title"],"price":1099,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","options":["Title"],"media":[{"alt":null,"id":14878581424328,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_2.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581457096,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_3.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581489864,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_6.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581522632,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_7.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581555400,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_8.jpg?v=1604908668","width":1000},{"alt":null,"id":14878581588168,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0097_1.jpg?v=1604908668","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct introduction:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eStereo smart Bluetooth receiver board\/receiver (power amplifier\/car audio speaker refitted with Bluetooth receiver board), product design parts layout is neat, reasonable and beautiful, smart stereo Bluetooth receiver. The Bluetooth core uses Vimicro's high-quality Lisheng Bluetooth chip, built-in enhanced signal transmission circuit, Bluetooth receiving distance is stable and continuous tone, built-in AEC echo cancellation and ANC noise cancellation circuit, hands-free calls are ultra-quiet without echo and noise, and external input signals are intelligently converted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWide-voltage power supply smart stereo Bluetooth receiver board\/receiver, the default volume is the maximum output after power-on\/DIY independent button operation\/hands-free call\/Bluetooth automatic connection\/intelligent automatic conversion of AUX input signal\/low noise\/low sound when starting POPO\/Bluetooth Receive ultra-stable and uninterrupted noise\/circuit board design is ultra-small and beautiful and exquisite\/reserved to the external antenna interface, wide-voltage power supply with terminal plug-in line to connect power and signal output input, modified power amplifier, car audio is convenient and practical.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eTechnical Parameters:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth specification: Bluetooth V4.O+EDR;\u003c\/li\u003e\n\u003cli\u003eTransmission power: CLASS2;\u003c\/li\u003e\n\u003cli\u003eSupport Bluetooth protocol: HFP V1.5 2DP(1.1), AVCRP1.3;\u003c\/li\u003e\n\u003cli\u003eHands-free agreement: (1.6);\u003c\/li\u003e\n\u003cli\u003eTransmission distance: about 15M (open place);\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 3.6V to 30V;\u003c\/li\u003e\n\u003cli\u003eFrequency response: \u0026gt;80Hz-22KHz;\u003c\/li\u003e\n\u003cli\u003eSignal to noise ratio: \u0026gt;80dB;\u003c\/li\u003e\n\u003cli\u003eOutput power: \u0026gt;600m(-4 dBM)x2CH\u003c\/li\u003e\n\u003cli\u003eStereo separation: \u0026gt;50dB\u003c\/li\u003e\n\u003cli\u003eChannel balance: less than 2dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eManual：\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eSoftware description: The default Bluetooth function is powered on and the Bluetooth is paired (blue light is flashing). If there is no Bluetooth music signal, it will automatically switch to AUX to input music, and the red light will be on. Bluetooth music is played first, and it will automatically switch to play Bluetooth music as soon as the Bluetooth signal comes out. There is no need to dial out or turn off the external input music without affecting the sound quality of Bluetooth music.\u003c\/li\u003e\n\u003cli\u003e1. Connect the signal output to the input of the amplifier and connect to the power supply (3.6V to 30V). Note: There are two power sockets (choose one, do not connect to two power supplies), one group is connected to 3.6-5V; the other One set is connected to 7-30v, please choose the appropriate connection.\u003c\/li\u003e\n\u003cli\u003e2. Power on and turn on: the horn will emit a buzz-boom tone, and the blue light flashes quickly.\u003c\/li\u003e\n\u003cli\u003e3. Bluetooth connection: After the power is turned on, the Bluetooth will automatically enter the search (blue light flashes) and enter the waiting state for pairing. At this time, set your mobile phone Bluetooth to the on state, turn on the mobile phone Bluetooth function to search, and find the local device LANNI Click, a pairing prompt appears on the Bluetooth device, click on pairing, a beep will sound, the blue light flashes slowly, and the Bluetooth connection is successful. You can use the Bluetooth power amplifier to play the music in the phone and receive calls. This machine has a callback function, After successfully connecting the Bluetooth of the device, turning on the Bluetooth again will automatically connect.\u003c\/li\u003e\n\u003cli\u003e4. Smart AUK external audio playback, connect the AUX audio cable to the computer or other player output, Bluetooth is not connected or connected without playing or pausing the music automatically to the AUX input signal, the red light is on.\u003c\/li\u003e\n\u003cli\u003e5. Power off state: both the blue light and the red light are off.\u003c\/li\u003e\n\u003cli\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/li\u003e\n\u003cli\u003eKey operation instructions (Bluetooth pairing connection is successfully synchronized with the phone keys, and the phone keys can also be operated)\u003c\/li\u003e\n\u003cli\u003eNEXT key: Short press to select the next song being played\u003c\/li\u003e\n\u003cli\u003ePREV key: Short press to select the previous song being played\u003c\/li\u003e\n\u003cli\u003ePlay\/Pause\/Answer: When playing, short press to pause; when pause, short press to play, long press to redial the call; when the Bluetooth connection is successful, when there is an incoming call, short press to answer the call, long press to reject the call Phone, short press to hang up during a call.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eOne receiving module\u003c\/li\u003e\n\u003cli\u003eOne button board (three buttons), one microphone with line (line length 13CM)\u003c\/li\u003e\n\u003cli\u003e2 power cords\u003c\/li\u003e\n\u003c\/ul\u003e"}
