DIY Radio 40M CW Shortwave Transmitter Module Micro Low Power Amplitude Telegraph QRP Pixie Kit Receiver Board

DIY Radio 40M CW Shortwave Transmitter Module Micro Low Power Amplitude Telegraph QRP Pixie Kit Receiver Board

SKU:010930
Regular price $6.99

This kit is a classic low-power transceivers.

This is a very small volume of simple 40 meter band micro-power amplitude telegraph transceiver uses a 9V square battery. 
The reception is good, highly readable code, is the entry of the most junior amateur radio choice!

Technical parameters:
Power supply: DC 9V-14V 
Antenna: 50 ohm, unbalanced 
Receive quiescent current: 10mA @ 9V 
Transmit power: 0.8W @ 9V, 1.2W @ 12V 
Frequency range: launch 7.023MHz, receive 7.023-7.026MHz (7.023MHz crystal) 
Mode: CW 

Shell selection and installation: 
Beautiful metal case not only for item considerably, and can effectively shield nearby interference.
There are many optional shell, 
for example, metal cans, aluminum boxes, medical elongated aluminum box andso on. 
Select the box in time topay attention as easy to open, because the battery ran out and need replacing.


Recommendations:
The confidential achieve better results,
set the antenna performance can not be less than the full length of the horizontal half-wave dipole antenna,
in conjunction with the use of Simple Barron, antennas should be kept away from sources of interference, 
such as fluorescent lights, computer monitors, switching power supplies
and other equipment as much as possible with the coaxial cable as feeders to reduce possible interference received,

as a small selection of the broadcast interference morning
or late at night listening to get the best results listen to SSB and CW signals signal.
The default shipping for spare parts kit. 

 

Package Included:

1 x   DIY RADIO 40M CW Shortwave Transmitter QRP Pixie Kit Receiver 7.023-7.026MHz (same as we show in second photo)

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

This kit is a classic low-power transceivers.

This is a very small volume of simple 40 meter band micro-power amplitude telegraph transceiver uses a 9V square battery. 
The reception is good, highly readable code, is the entry of the most junior amateur radio choice!

Technical parameters:
Power supply: DC 9V-14V 
Antenna: 50 ohm, unbalanced 
Receive quiescent current: 10mA @ 9V 
Transmit power: 0.8W @ 9V, 1.2W @ 12V 
Frequency range: launch 7.023MHz, receive 7.023-7.026MHz (7.023MHz crystal) 
Mode: CW 

Shell selection and installation: 
Beautiful metal case not only for item considerably, and can effectively shield nearby interference.
There are many optional shell, 
for example, metal cans, aluminum boxes, medical elongated aluminum box andso on. 
Select the box in time topay attention as easy to open, because the battery ran out and need replacing.


Recommendations:
The confidential achieve better results,
set the antenna performance can not be less than the full length of the horizontal half-wave dipole antenna,
in conjunction with the use of Simple Barron, antennas should be kept away from sources of interference, 
such as fluorescent lights, computer monitors, switching power supplies
and other equipment as much as possible with the coaxial cable as feeders to reduce possible interference received,

as a small selection of the broadcast interference morning
or late at night listening to get the best results listen to SSB and CW signals signal.
The default shipping for spare parts kit. 

 

Package Included:

1 x   DIY RADIO 40M CW Shortwave Transmitter QRP Pixie Kit Receiver 7.023-7.026MHz (same as we show in second photo)

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.