GY21-SHT21 Humidity Temperature Sensor Sensors
GY21-SHT21 Humidity Temperature Sensor Sensors
SKU:010013- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
The Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.
The SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application.
To optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.
The sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations.
The board ships a with a 4-pin male header which has not been soldered on.
* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement/s)
* Relative Humidity operating range: 0-100% RH
* Relative Humidity resolution of 0.03%
* Relative Humidity Response Time of 8 sec (tau 63%)
* Temperature operating range: -40 to +125°C
* Temperature resolution of 0.01 C
* 4 pins: +5V, GND, Clock (SCL), Data (SDA)
* Bidirectional communication over a single pin on I2C protocol
* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I/O pins
Applications
* Homes, basements and HVAC systems for measuring humidity
* People with physical conditions sensitive to humidity
* Home ventilating, heating and air conditioning systems
* Meteorology stations to predict or check weather temperatures
* Gardens or greenhouses to check humidity and temperatures
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $12.99{"id":2513525014586,"title":"GY21-SHT21 Humidity Temperature Sensor Sensors","handle":"sht21-sht11-sht15-sensors-digital-humidity-and-temperature-sensor-module-for-replacing-sensors-board","description":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-09-11T14:57:02+08:00","created_at":"2019-09-11T14:57:05+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23704868683834,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010013","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"GY21-SHT21 Humidity Temperature Sensor Sensors","public_title":null,"options":["Default Title"],"price":699,"weight":2,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","options":["Title"],"media":[{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679058743367,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059071047,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059234887,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $9.99{"id":2513525014586,"title":"GY21-SHT21 Humidity Temperature Sensor Sensors","handle":"sht21-sht11-sht15-sensors-digital-humidity-and-temperature-sensor-module-for-replacing-sensors-board","description":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-09-11T14:57:02+08:00","created_at":"2019-09-11T14:57:05+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23704868683834,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010013","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"GY21-SHT21 Humidity Temperature Sensor Sensors","public_title":null,"options":["Default Title"],"price":699,"weight":2,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","options":["Title"],"media":[{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679058743367,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059071047,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059234887,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $5.99{"id":2513525014586,"title":"GY21-SHT21 Humidity Temperature Sensor Sensors","handle":"sht21-sht11-sht15-sensors-digital-humidity-and-temperature-sensor-module-for-replacing-sensors-board","description":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-09-11T14:57:02+08:00","created_at":"2019-09-11T14:57:05+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23704868683834,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010013","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"GY21-SHT21 Humidity Temperature Sensor Sensors","public_title":null,"options":["Default Title"],"price":699,"weight":2,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","options":["Title"],"media":[{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679058743367,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059071047,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059234887,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $4.99{"id":2513525014586,"title":"GY21-SHT21 Humidity Temperature Sensor Sensors","handle":"sht21-sht11-sht15-sensors-digital-humidity-and-temperature-sensor-module-for-replacing-sensors-board","description":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-09-11T14:57:02+08:00","created_at":"2019-09-11T14:57:05+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23704868683834,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010013","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"GY21-SHT21 Humidity Temperature Sensor Sensors","public_title":null,"options":["Default Title"],"price":699,"weight":2,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","options":["Title"],"media":[{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679058743367,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059071047,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059234887,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $8.99{"id":2513525014586,"title":"GY21-SHT21 Humidity Temperature Sensor Sensors","handle":"sht21-sht11-sht15-sensors-digital-humidity-and-temperature-sensor-module-for-replacing-sensors-board","description":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-09-11T14:57:02+08:00","created_at":"2019-09-11T14:57:05+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23704868683834,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010013","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"GY21-SHT21 Humidity Temperature Sensor Sensors","public_title":null,"options":["Default Title"],"price":699,"weight":2,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","options":["Title"],"media":[{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679058743367,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059071047,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059234887,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $9.99{"id":2513525014586,"title":"GY21-SHT21 Humidity Temperature Sensor Sensors","handle":"sht21-sht11-sht15-sensors-digital-humidity-and-temperature-sensor-module-for-replacing-sensors-board","description":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-09-11T14:57:02+08:00","created_at":"2019-09-11T14:57:05+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23704868683834,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010013","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"GY21-SHT21 Humidity Temperature Sensor Sensors","public_title":null,"options":["Default Title"],"price":699,"weight":2,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","options":["Title"],"media":[{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679058743367,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF_415.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059071047,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF2_865.jpg?v=1588661018","width":1000},{"alt":"Gy21-Sht21 Humidity Temperature Sensor Sensors Module","id":6679059234887,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010013_CF3_613.jpg?v=1588661018","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe Humidity and Temperature Sensor is an Ar-compatible sensor board that carries an SHT21 digital humidity and temperature sensor from Sensirion. It has a 4-pin interface that can communicate directly with the analog pins on the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe SHT21 utilizes a capacitive sensor element to measure humidity, while the temperature is measured by a band gap sensor. Both sensors are seamlessly coupled to a 14-bit ADC, which then transmits digital data to the Ar over the I2C protocol. Because of the sensor's tiny size, it has incredibly low power consumption, making it suited for virtually any application. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eTo optimize accuracy of temperature and humidity readings, the SHT21 sensor is placed at the tip of the board, isolating it from heat producing circuitry. Two of the sensor's four pins are ground and +5V; the other two are clock and data pins that make up the 2-wire serial interface. The board is 5V tolerant and designed to operate directly off the supply voltage coming from the Ar.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe sensor can be placed in soil to measure moisture and temperature, which makes it ideal for using it in a garden or greenhouse. The humidity sensor is also especially useful in building remote weather stations. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eThe board ships a with a 4-pin male header which has not been soldered on.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eSpecifications\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Energy consumption: 80 uW (at 12 bit, 3V, 1 measurement\/s)\u003cbr\u003e* Relative Humidity operating range: 0-100% RH\u003cbr\u003e* Relative Humidity resolution of 0.03%\u003cbr\u003e* Relative Humidity Response Time of 8 sec (tau 63%)\u003cbr\u003e* Temperature operating range: -40 to +125°C\u003cbr\u003e* Temperature resolution of 0.01 C\u003cbr\u003e* 4 pins: +5V, GND, Clock (SCL), Data (SDA)\u003cbr\u003e* Bidirectional communication over a single pin on I2C protocol\u003cbr\u003e* Board is 5V tolerant, allowing sensor to run from a 5V supply on Ar I\/O pins\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003eApplications\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: arial , helvetica , sans-serif;\"\u003e* Homes, basements and HVAC systems for measuring humidity\u003cbr\u003e* People with physical conditions sensitive to humidity\u003cbr\u003e* Home ventilating, heating and air conditioning systems\u003cbr\u003e* Meteorology stations to predict or check weather temperatures\u003cbr\u003e* Gardens or greenhouses to check humidity and temperatures\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}