SI1145 UV IR Visible Sensor Board I2C IIC GY-1145 6Pin Header Light Breakout Module Digital Sensor With Pin Header

Si1145 Uv Ir Visible Sensor Board I2C Iic Gy-1145 6Pin Header Light Breakout Module Digital With Pin

SI1145 UV IR Visible Sensor Board I2C IIC GY-1145 6Pin Header Light Breakout Module Digital Sensor With Pin Header

SKU:011786
Regular price $8.99 USD

 

 


 
 
 
This is a digital sensor that works over I2C so just about any microcontroller can use it. The sensor also has visible and IR sensing elements so you can measure just about any kind of light - but only the UV sensor has a calibrated output so if you need precision Lux measurement check out the TSL2561. If you're feeling really advanced, you can connect up an IR LED to the LED pin and use the basic proximity sensor capability as well. 
 
 
Pinout:
 
Vin - this is the input to the voltage regulator. Power with 3-5VDC. Has reverse-polarity protection.
GND - this is the signal and power ground pin, connect to your microcontroller ground pin
3vo - this is the output from the onboard regulator. If you need a clean 3.3VDC, you can draw up to 100mA from this pin.
SCL - this is the i2c clock pin, connect to your microcontroller I2C clock master pin.
SDA - this is the i2c data pin, connect to your microcontroller I2C data master pin.
 
 
 
Package Included:
 
1 X SI1145 UV Sensor
1 X 6P Pin Header 
 
 


 

 
 

 

 

 
 
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 

 


 
 
 
This is a digital sensor that works over I2C so just about any microcontroller can use it. The sensor also has visible and IR sensing elements so you can measure just about any kind of light - but only the UV sensor has a calibrated output so if you need precision Lux measurement check out the TSL2561. If you're feeling really advanced, you can connect up an IR LED to the LED pin and use the basic proximity sensor capability as well. 
 
 
Pinout:
 
Vin - this is the input to the voltage regulator. Power with 3-5VDC. Has reverse-polarity protection.
GND - this is the signal and power ground pin, connect to your microcontroller ground pin
3vo - this is the output from the onboard regulator. If you need a clean 3.3VDC, you can draw up to 100mA from this pin.
SCL - this is the i2c clock pin, connect to your microcontroller I2C clock master pin.
SDA - this is the i2c data pin, connect to your microcontroller I2C data master pin.
 
 
 
Package Included:
 
1 X SI1145 UV Sensor
1 X 6P Pin Header