Soil humidity Sensor Hygrometer Moisture Detection Sensor w/ Corrosion Resistance Probe Module Board Diy Electronic
Soil humidity Sensor Hygrometer Moisture Detection Sensor w/ Corrosion Resistance Probe Module Board Diy Electronic
SKU:012796
Regular price
$4.10 USD
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Specification:
Name: Soil humidity sensor
Size: 36*15*7mm
Voltage:DC 3.3-12V
Current: <20mA; <30mA (output)
Interface:+ - DO AO; DO digital value; AO analog value
Operating Temperature:-25~85 Celsius
Application:
The soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.
Using Introduction:
1."+" connects power positive; "-" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, "P" power indicator lamp will be on and the module will operate normally
2.Clockwise/counter clockwise adjust the blue potentiometer, it can improve/reduce the detection sensitivity. Take "Thermal Sensor" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger
3.When clockwise adjusts the potentiometer to "S" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output
4.AO output is analog value (voltage), and it can detect via MCU AD port.
When the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor
Package Included:
1 x Soil Humidity Hygrometer Moisture Detection Sensor Module
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $12.99 USD{"id":2517116158010,"title":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","handle":"soil-humidity-sensor-hygrometer-moisture-detection-sensor-w-corrosion-resistance-probe-module-board-diy-electronic","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e","published_at":"2022-09-19T12:19:23+08:00","created_at":"2019-09-17T20:55:25+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":410,"price_min":410,"price_max":410,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23727126609978,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012796","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","public_title":null,"options":["Default Title"],"price":410,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","options":["Title"],"media":[{"alt":"Soil Humidity Sensor Hygrometer Moisture Detection W\/ Corrosion Resistance Probe Module Board Diy","id":6679119036487,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $11.80 USD{"id":2517116158010,"title":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","handle":"soil-humidity-sensor-hygrometer-moisture-detection-sensor-w-corrosion-resistance-probe-module-board-diy-electronic","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e","published_at":"2022-09-19T12:19:23+08:00","created_at":"2019-09-17T20:55:25+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":410,"price_min":410,"price_max":410,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23727126609978,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012796","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","public_title":null,"options":["Default Title"],"price":410,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","options":["Title"],"media":[{"alt":"Soil Humidity Sensor Hygrometer Moisture Detection W\/ Corrosion Resistance Probe Module Board Diy","id":6679119036487,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $5.99 USD{"id":2517116158010,"title":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","handle":"soil-humidity-sensor-hygrometer-moisture-detection-sensor-w-corrosion-resistance-probe-module-board-diy-electronic","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e","published_at":"2022-09-19T12:19:23+08:00","created_at":"2019-09-17T20:55:25+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":410,"price_min":410,"price_max":410,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23727126609978,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012796","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","public_title":null,"options":["Default Title"],"price":410,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","options":["Title"],"media":[{"alt":"Soil Humidity Sensor Hygrometer Moisture Detection W\/ Corrosion Resistance Probe Module Board Diy","id":6679119036487,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $4.99 USD{"id":2517116158010,"title":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","handle":"soil-humidity-sensor-hygrometer-moisture-detection-sensor-w-corrosion-resistance-probe-module-board-diy-electronic","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e","published_at":"2022-09-19T12:19:23+08:00","created_at":"2019-09-17T20:55:25+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":410,"price_min":410,"price_max":410,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23727126609978,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012796","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","public_title":null,"options":["Default Title"],"price":410,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","options":["Title"],"media":[{"alt":"Soil Humidity Sensor Hygrometer Moisture Detection W\/ Corrosion Resistance Probe Module Board Diy","id":6679119036487,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $8.99 USD{"id":2517116158010,"title":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","handle":"soil-humidity-sensor-hygrometer-moisture-detection-sensor-w-corrosion-resistance-probe-module-board-diy-electronic","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e","published_at":"2022-09-19T12:19:23+08:00","created_at":"2019-09-17T20:55:25+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":410,"price_min":410,"price_max":410,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23727126609978,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012796","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","public_title":null,"options":["Default Title"],"price":410,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","options":["Title"],"media":[{"alt":"Soil Humidity Sensor Hygrometer Moisture Detection W\/ Corrosion Resistance Probe Module Board Diy","id":6679119036487,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price $9.99 USD{"id":2517116158010,"title":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","handle":"soil-humidity-sensor-hygrometer-moisture-detection-sensor-w-corrosion-resistance-probe-module-board-diy-electronic","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e","published_at":"2022-09-19T12:19:23+08:00","created_at":"2019-09-17T20:55:25+08:00","vendor":"diymore","type":"Temperature Humidity Sensor Module","tags":[],"price":410,"price_min":410,"price_max":410,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23727126609978,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012796","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil humidity Sensor Hygrometer Moisture Detection Sensor w\/ Corrosion Resistance Probe Module Board Diy Electronic","public_title":null,"options":["Default Title"],"price":410,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","options":["Title"],"media":[{"alt":"Soil Humidity Sensor Hygrometer Moisture Detection W\/ Corrosion Resistance Probe Module Board Diy","id":6679119036487,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1nFujaI_vK1Rjy0Foq6xIxVXaW_652.jpg?v=1588661673","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eName: Soil humidity sensor\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eSize: 36*15*7mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eVoltage:DC 3.3-12V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eCurrent: \u0026lt;20mA; \u0026lt;30mA (output)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eInterface:+ - DO AO; DO digital value; AO analog value\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eOperating Temperature:-25~85 Celsius\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eThe soil humidity probe is for detecting humidity, and the voltage comparator is for judging humidity amount; when the humidity is larger than set value , DO will output low level.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eUsing Introduction:\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1.\"+\" connects power positive; \"-\" connects power negative. Please do not connect reversely, or it will burn the chip. After connection, \"P\" power indicator lamp will be on and the module will operate normally\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e2.Clockwise\/counter clockwise adjust the blue potentiometer, it can improve\/reduce the detection sensitivity. Take \"Thermal Sensor\" as example, if defaults 25 Celsius trigger, DO output low level is valid; After clockwise adjusting, that is when the temperature is lower than 25 Celsius, it can trigger; if counter clockwise adjusting, then higher than 25 Celsius can trigger\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e3.When clockwise adjusts the potentiometer to \"S\" output indicator is on, it represents the adjusting range has surpassed the testing threshold; if counter clockwise adjusting to its max extend, it surpasses the threshold. When adjusting, please do no let them over the threshold, or it cannot be used normally.Potentiometer adjustment is only used for DO port, it has no relevance to AO output\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e4.AO output is analog value (voltage), and it can detect via MCU AD port.\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003eWhen the detected value is more than the set value, DO will output low level, the triode will be connected and the load will operate. 1K is current-limiting resistor, and 10K is pull-up resistor\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e1 x Soil Humidity Hygrometer Moisture Detection Sensor Module\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;font-family: verdana;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1B9OkaJjvK1RjSspiq6AEqXXaa.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1R_qdaU_rK1Rjy0Fcq6zEvVXa8.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1v81aaOrxK1RkHFCcq6AQCVXaX.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB18UikaOHrK1Rjy0Flq6AsaFXaC.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1DheeaOnrK1Rjy1Xcq6yeDVXaH.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1S.1iaOzxK1RkSnaVq6xn9VXal.jpg\" style=\"width: 1000.0px;\"\u003e\u003c\/p\u003e"}
