ESP-M2 ESP8285 Serial Port Wireless WiFi Adapter Transmission Module DC 3.3V For ESP8266 1M Long-Range Ultra-Low Power

Esp-M2 Esp8285 Serial Port Wireless Wifi Adapter Transmission Module Dc 3.3V For Esp8266 1M

ESP-M2 ESP8285 Serial Port Wireless WiFi Adapter Transmission Module DC 3.3V For ESP8266 1M Long-Range Ultra-Low Power

SKU:012461
Regular price $6.28 Sale price $4.99

 

 

 

 

ESP-M2 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated a advanced Tensilica's L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design.
 
 
 
Features
 
Ultra-small size; 
 
Support serial to WiFi; 
 
Wireless transparent transmission; 
 
Long distance transmission with ultra-low power; 
 
Support outboard antenna; 
 
Bearing high temperature to 125 °, compared to the 85° for ESP8266.
 
 
Description:
 
ESP8285=ESP8266+1M Flash, chip feature
1) size is ultra-small
2) serial to WiFi
3) wireless transmission
4) long-range ultra-low power consumption
5) high temperature, up to 125 °
6) fully compatible with ESP8266, the esp8266 source code can be used for esp8285
 
 
SOC Features
 
Built-in Tensilica L106 ultra-low power 32-bit microprocessor, clocked at 80MHz and 160MHz support RTOS
Built-in TCP / IP protocol stack
Built-in 1 channel 10 bit precision ADC
Peripheral Interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
The deep sleep hold current is 10uA and the shutdown current is less than 5uA
Wake up within 2 ms, connect and pass the packet
Standby power consumption less than 1.0mW (DTIM3)
 
 
Wi-Fi features
 
Supports 802.11 b / g / n / e / i
Support Station, SoftAP, SoftAP + STA mode
Support for Wi-Fi Direct (P2P)
Supports CCMP (CBC-, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC hardware acceleration
P2P discovery, P2P GO mode / GC mode and P2P power management
WPA / PA2 PSK and WPS
802.11 i security features: pre-authentication and TSN
Supports 802.11n (2.4 GHz)
802.1h / RFC1042 frame encapsulation
Seamless roaming support
Support AT remote upgrade and cloud OTA upgrade
Support for Smart Config features (including Android and iOS devices)
 
 
Module peripherals
 
2xUART
1xADC
1xEn
1x wakeup pin
1xHSPI
1xI2C
1xI2S
Up to 11xGPIOs
4M bytes of SPI Flash
Operating temperature range: -40 ° -85 °
Module size: 12.3mm×20mm
Note:
Power supply oltage is DC 3.3V
IO max output current is 12mA
NRST pin active low, EN enable pin active high RXD to MCU's TXD, TXD to MCU'S RXD
 
 
Application 
 
Household appliances
Smart socket, intelligent light
Baby monitor
Sensor Networks
Security ID tag
Wireless positioning system beacon
Home automation
Mesh network
IP camera
Can wear electronic products
Wireless location awareness
Industrial Wireless Control
 
 
Package Included:
 
1 X ESP-M2 ESP8285 Wifi Module
 
 

 
 
012461  (3) 012461  (5) 012461  (2) 012461  (6)
 
 

 

 

 

 

 

 
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 

 

 

 

ESP-M2 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated a advanced Tensilica's L106 32-bit CPU, together with SRAM. ESP825 has the full and complete WiFi fuction, which can used independently and alsoused as a slaver with other Hoster MCU, which can start directly from the out-built Flash. In addition, the built-in high-speed buffer is benefit for the system performance. Especially, ESP8285 can be used as a WiFi adapter by SPI/SDIO and/or I2C/UART interface, when it is applied to the other MCU design.
 
 
 
Features
 
Ultra-small size; 
 
Support serial to WiFi; 
 
Wireless transparent transmission; 
 
Long distance transmission with ultra-low power; 
 
Support outboard antenna; 
 
Bearing high temperature to 125 °, compared to the 85° for ESP8266.
 
 
Description:
 
ESP8285=ESP8266+1M Flash, chip feature
1) size is ultra-small
2) serial to WiFi
3) wireless transmission
4) long-range ultra-low power consumption
5) high temperature, up to 125 °
6) fully compatible with ESP8266, the esp8266 source code can be used for esp8285
 
 
SOC Features
 
Built-in Tensilica L106 ultra-low power 32-bit microprocessor, clocked at 80MHz and 160MHz support RTOS
Built-in TCP / IP protocol stack
Built-in 1 channel 10 bit precision ADC
Peripheral Interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
The deep sleep hold current is 10uA and the shutdown current is less than 5uA
Wake up within 2 ms, connect and pass the packet
Standby power consumption less than 1.0mW (DTIM3)
 
 
Wi-Fi features
 
Supports 802.11 b / g / n / e / i
Support Station, SoftAP, SoftAP + STA mode
Support for Wi-Fi Direct (P2P)
Supports CCMP (CBC-, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRC hardware acceleration
P2P discovery, P2P GO mode / GC mode and P2P power management
WPA / PA2 PSK and WPS
802.11 i security features: pre-authentication and TSN
Supports 802.11n (2.4 GHz)
802.1h / RFC1042 frame encapsulation
Seamless roaming support
Support AT remote upgrade and cloud OTA upgrade
Support for Smart Config features (including Android and iOS devices)
 
 
Module peripherals
 
2xUART
1xADC
1xEn
1x wakeup pin
1xHSPI
1xI2C
1xI2S
Up to 11xGPIOs
4M bytes of SPI Flash
Operating temperature range: -40 ° -85 °
Module size: 12.3mm×20mm
Note:
Power supply oltage is DC 3.3V
IO max output current is 12mA
NRST pin active low, EN enable pin active high RXD to MCU's TXD, TXD to MCU'S RXD
 
 
Application 
 
Household appliances
Smart socket, intelligent light
Baby monitor
Sensor Networks
Security ID tag
Wireless positioning system beacon
Home automation
Mesh network
IP camera
Can wear electronic products
Wireless location awareness
Industrial Wireless Control
 
 
Package Included:
 
1 X ESP-M2 ESP8285 Wifi Module
 
 

 
 
012461  (3) 012461  (5) 012461  (2) 012461  (6)
 
 

 

 

 

 

 

 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.