AC 220V 433MHz 2 Channel 2CH Independent Wireless RF Relay Remote Control Switch Controller Module Receiver 10A 2 Way

Ac 220V 433Mhz 2 Channel 2Ch Independent Wireless Rf Relay Remote Control Switch Controller Module

AC 220V 433MHz 2 Channel 2CH Independent Wireless RF Relay Remote Control Switch Controller Module Receiver 10A 2 Way

SKU:100028
Regular price $7.99 USD

Specification: 
 
Brand new
Color: as picture shows
Quantity: 1pc
2 CH DC12V 10A independent wireless controller
 
Applicable for controlling family, office, shopping malls, hotels, hospital, warehouses and other places of fluorescent lamps, energy-saving lamps, incandescent lamp, halogen lamp, and the electric water heater through a power on-off control of household appliances.
 
It can learn 2272 2262 or 1527 chip with the different code wireless remote control
 
Learning:
 
Press the learning button A until the indicator flash ,loosen your finger
 
Press button A of the remote control ,the indicator flash 2 times and off .it mean you learn it successfully (Learning button B also the same )
 
Remove/clean:
 
Press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully .
 
Features :
 
220V 2 CH Wireless Relay Switch
Input Voltage: AC85V-AC220V
 
RF Frequency: 433MHZ
 
RF Working mode:Super heterodyne receiver
 
Receiver Sensitivity: -107dBm
 
Remote Control Distance: >100 meter(In open environment)
 
Decoding Way: MCU Software decoding
 
Can store the number of remote control:32
 
Support remote control type: Fixed code, learning code
 
Channel: 2CH
 
Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)
 
Wiring Method:Fixed wiring terminal
 
Rated load:10A 250VAC / 10A 125VAC
 
10A 30VDC / 10A 28VDC
 
Dimension:6.9cm*4.85cm*1.7cm
 
Working/output way:
 
Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
 
Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
 
Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
 
Reset new operating mode
 
Jogging:
 
Press the white learning button on the top of the control panel, LED lights, and then press any button on the remote control set to 'Jog' button, the control panel LED lights flashing, indicating that the setup is complete
 
Self-locking:
 
Press the white learning button on the top of the control panel, LED lights, and then press any button on the remote control to set to 'self-locking' button, the control panel LED lights flashing,
 
Interlock:
 
Press the white learning button on the control panel, the LED lights, and then press any button on the remote control set to 'start' button, the control panel LED lights flashing, press another button to set to 'stop' button LED Blinking means the setting is complete
 
Package included:
 
1 x 220V 2 CH Wireless Relay Switch 433MHz 

 



 

 

 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
Specification: 
 
Brand new
Color: as picture shows
Quantity: 1pc
2 CH DC12V 10A independent wireless controller
 
Applicable for controlling family, office, shopping malls, hotels, hospital, warehouses and other places of fluorescent lamps, energy-saving lamps, incandescent lamp, halogen lamp, and the electric water heater through a power on-off control of household appliances.
 
It can learn 2272 2262 or 1527 chip with the different code wireless remote control
 
Learning:
 
Press the learning button A until the indicator flash ,loosen your finger
 
Press button A of the remote control ,the indicator flash 2 times and off .it mean you learn it successfully (Learning button B also the same )
 
Remove/clean:
 
Press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully .
 
Features :
 
220V 2 CH Wireless Relay Switch
Input Voltage: AC85V-AC220V
 
RF Frequency: 433MHZ
 
RF Working mode:Super heterodyne receiver
 
Receiver Sensitivity: -107dBm
 
Remote Control Distance: >100 meter(In open environment)
 
Decoding Way: MCU Software decoding
 
Can store the number of remote control:32
 
Support remote control type: Fixed code, learning code
 
Channel: 2CH
 
Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)
 
Wiring Method:Fixed wiring terminal
 
Rated load:10A 250VAC / 10A 125VAC
 
10A 30VDC / 10A 28VDC
 
Dimension:6.9cm*4.85cm*1.7cm
 
Working/output way:
 
Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
 
Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
 
Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
 
Reset new operating mode
 
Jogging:
 
Press the white learning button on the top of the control panel, LED lights, and then press any button on the remote control set to 'Jog' button, the control panel LED lights flashing, indicating that the setup is complete
 
Self-locking:
 
Press the white learning button on the top of the control panel, LED lights, and then press any button on the remote control to set to 'self-locking' button, the control panel LED lights flashing,
 
Interlock:
 
Press the white learning button on the control panel, the LED lights, and then press any button on the remote control set to 'start' button, the control panel LED lights flashing, press another button to set to 'stop' button LED Blinking means the setting is complete
 
Package included:
 
1 x 220V 2 CH Wireless Relay Switch 433MHz