HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino
HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino
SKU:010118- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Specification:
1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.
2. Module working voltage 3.3 V.
3. Potter default rate of 9600, the user can be set up.
4. The core module size : 28 mm x 15 mm x 2.35 mm.
5. Working current: matching for 30 MA, matching the communication for 8 MA.
6. Dormancy current: no dormancy.
Used for GPS navigation system, water and electricity gas meter reading system.
With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment
Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC、GND、TXD、RXD foot for the Bluetooth
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach)
Compatible with bluetooth master module"、slave module"or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm
Note:
input power supply 3.3~6V, Prohibit more than 7V
No "Automatically prevent power supply peversing func", so please correctly connect power supply
We advise to install "Bluetooth master module"
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU"
If only the board , No any "Bluetooth Function "
It's HC-05 Bluetooth module Slave and master two in one module
this module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.
Package Included:
1PCS*HC-05 bluetooth module with backboard
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $5.99{"id":1793754431546,"title":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","handle":"hc-05-6-pin-wireless-bluetooth-rf-transceiver-module-serial-for-arduino-uk","description":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e","published_at":"2018-08-04T15:38:11+08:00","created_at":"2018-08-04T15:48:55+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Wireless"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17279698370618,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010118","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":4,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","options":["Title"],"media":[{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569320519,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569386055,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569451591,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569549895,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569680967,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569812039,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569910343,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $5.99{"id":1793754431546,"title":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","handle":"hc-05-6-pin-wireless-bluetooth-rf-transceiver-module-serial-for-arduino-uk","description":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e","published_at":"2018-08-04T15:38:11+08:00","created_at":"2018-08-04T15:48:55+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Wireless"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17279698370618,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010118","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":4,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","options":["Title"],"media":[{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569320519,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569386055,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569451591,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569549895,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569680967,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569812039,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569910343,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $7.99{"id":1793754431546,"title":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","handle":"hc-05-6-pin-wireless-bluetooth-rf-transceiver-module-serial-for-arduino-uk","description":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e","published_at":"2018-08-04T15:38:11+08:00","created_at":"2018-08-04T15:48:55+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Wireless"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17279698370618,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010118","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":4,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","options":["Title"],"media":[{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569320519,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569386055,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569451591,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569549895,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569680967,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569812039,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569910343,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $9.99{"id":1793754431546,"title":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","handle":"hc-05-6-pin-wireless-bluetooth-rf-transceiver-module-serial-for-arduino-uk","description":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e","published_at":"2018-08-04T15:38:11+08:00","created_at":"2018-08-04T15:48:55+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Wireless"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17279698370618,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010118","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":4,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","options":["Title"],"media":[{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569320519,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569386055,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569451591,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569549895,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569680967,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569812039,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569910343,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $5.99{"id":1793754431546,"title":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","handle":"hc-05-6-pin-wireless-bluetooth-rf-transceiver-module-serial-for-arduino-uk","description":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e","published_at":"2018-08-04T15:38:11+08:00","created_at":"2018-08-04T15:48:55+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Wireless"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17279698370618,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010118","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":4,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","options":["Title"],"media":[{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569320519,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569386055,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569451591,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569549895,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569680967,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569812039,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569910343,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $8.99{"id":1793754431546,"title":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","handle":"hc-05-6-pin-wireless-bluetooth-rf-transceiver-module-serial-for-arduino-uk","description":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e","published_at":"2018-08-04T15:38:11+08:00","created_at":"2018-08-04T15:48:55+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Wireless"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17279698370618,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010118","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"HC-05 6 Pin Wireless Bluetooth RF Transceiver Module Serial for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":4,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","options":["Title"],"media":[{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569320519,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_10_289.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569386055,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_4_283.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569451591,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_7_655.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569549895,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_9_278.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569680967,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_11_811.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569812039,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_1_554.jpg?v=1588649888","width":1000},{"alt":"Hc-05 6 Pin Wireless Bluetooth Rf Transceiver Module Serial For Arduino Wifi","id":6678569910343,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010118_2_219.jpg?v=1588649888","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1. It is HC-05. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.\u003cbr\u003e2. Module working voltage 3.3 V.\u003cbr\u003e3. Potter default rate of 9600, the user can be set up.\u003cbr\u003e4. The core module size : 28 mm x 15 mm x 2.35 mm.\u003cbr\u003e5. Working current: matching for 30 MA, matching the communication for 8 MA.\u003cbr\u003e6. Dormancy current: no dormancy.\u003cbr\u003e\u003cbr\u003eUsed for GPS navigation system, water and electricity gas meter reading system.\u003cbr\u003eWith computer and bluetooth bluetooth adapter, PDA, seamless connection equipment\u003cbr\u003eCommercial Series: Bluetooth module board Series\u003cbr\u003eWith LED indicator light, use 150mA and 3.3V regulation chip.\u003cbr\u003eWith VCC、GND、TXD、RXD foot for the Bluetooth\u003cbr\u003eWith \"Re-seach\" button(ON\/OFF\/WAKE foot for it , external MCU outinput \"High level\" can control module to re-seach)\u003cbr\u003eCompatible with bluetooth master module\"、slave module\"or master-slave(whole) module.\u003cbr\u003eInput voltage: 3.3~6V\u003cbr\u003eSize: 1.55cm*3.98cm\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003einput power supply 3.3~6V, Prohibit more than 7V\u003cbr\u003eNo \"Automatically prevent power supply peversing func\", so please correctly connect power supply\u003cbr\u003eWe advise to install \"Bluetooth master module\"\u003cbr\u003eThe \"State\" is output foot for LED status, when bluetooth \"Unconnected\", output \"Pulse\" ; when bluetooth \"connected\", output \"High level\", we can determine the states from \"MCU\"\u003cbr\u003eIf only the board , No any \"Bluetooth Function \"\u003c\/p\u003e\n\u003cp\u003eIt's HC-05 Bluetooth module Slave and master two in one module\u003cbr\u003ethis module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e\u003cbr\u003e1PCS*HC-05 bluetooth module with backboard\u003c\/p\u003e"}